lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
SOLD!!! 2.1W 3 Mode 445nm Laser in a Highly Polished Saik SA-305 Host "One of a Kind"
SOLD>!!!
Hi All,
For Sale: "2.1W" 3 Mode 445nm Laser In a Highly Polished Saik Host.
This is a "One Of A Kind" and will never be duplicated by me. So you will be the only one that has One from me. The Polishing Job took ~15 hours to do. It was Not done in one sitting but over some weeks.:drool:
This Host is very beefy. They heatsink is a Nice solid chunk and will keep your laser very cool. This laser use a very efficient diode.:eg: It comes with a 445nm/405nm G1 Lens.(Note: Only Use the Lens that is Provided with the Laser and NEVER Switch to an Aixiz lens at this Power.) The Host has a Tripod Mount hole as well. It Runs off 2x 14500 cells and 1 spacer battery to take up the third terminal. It has my Custom 3 Mode X-Drive V6. You get ~20 minutes or so of ON Time in between Charges. Please fallow a Duty Cycle of <1 minutes 30 seconds ON 1 minute OFF.
The Modes are as Fallowed:
High Mode - 2.1W
Medium Pulsed Mode - 450mW
Strobe Mode - 1.1W
Everything in the Package:
1x 2.1W 445nm 3 Mode Highly Polish Laser "LPM Tested" "Guaranteed Power"
4x 3.7v Rechargeable 14500 Protected cells (2 Sets)
1x 405-G-1 Lens
1x Tripod
2x Micro-Fiber Cloths
1x 14500/AA Size Battery Spacer/Dummy Cell
2x Battery Holders/Cases
2x Green GITD Dust Cap & Black Dust Caps
-2 Weeks Warranty on the diode - 1 month on the driver/click.
As long as you dint cause the damage i will replace that part fully on me under the Warranty time frame above...
Warranty will be voided if you attempt to open the laser. There is a Void Seal that if you try and unscrew the Head it will break that seal. SO PLEASE DO NOT OPEN THE LASER. Thank You.
Pictures:
Here is a Picture of all the Accessories you Get. There is the 2 sets of 14500 protected cells , 2x Battery Holders/Cases , Tripod , 2x Micro-Fiber Cloths and your 2x Dust Caps 1 Black & 1 GITD.
Videos:
There is Very little Fog in Both videos.
Showing The laser on the Cool Tripod:
Price:
$499 FREE Shipping Priority mail with TRACKING in the USA. International I will only Ship with Express mail so i will have to check how much it would cost for your country.
PM me or Post.
PLEASE NOTE: I will Not sell this laser to anyone that does not have proper Laser safety Goggles. If you dont have a pair of Laser Safety goggles and you are still interested in it i can recommend a good pair for you to buy or i can buy them for you and ship everything at once. Thank You.
:thanks: For Looking.!!!
SOLD>!!!
Hi All,
For Sale: "2.1W" 3 Mode 445nm Laser In a Highly Polished Saik Host.
This is a "One Of A Kind" and will never be duplicated by me. So you will be the only one that has One from me. The Polishing Job took ~15 hours to do. It was Not done in one sitting but over some weeks.:drool:
This Host is very beefy. They heatsink is a Nice solid chunk and will keep your laser very cool. This laser use a very efficient diode.:eg: It comes with a 445nm/405nm G1 Lens.(Note: Only Use the Lens that is Provided with the Laser and NEVER Switch to an Aixiz lens at this Power.) The Host has a Tripod Mount hole as well. It Runs off 2x 14500 cells and 1 spacer battery to take up the third terminal. It has my Custom 3 Mode X-Drive V6. You get ~20 minutes or so of ON Time in between Charges. Please fallow a Duty Cycle of <1 minutes 30 seconds ON 1 minute OFF.
The Modes are as Fallowed:
High Mode - 2.1W
Medium Pulsed Mode - 450mW
Strobe Mode - 1.1W
Everything in the Package:
1x 2.1W 445nm 3 Mode Highly Polish Laser "LPM Tested" "Guaranteed Power"
4x 3.7v Rechargeable 14500 Protected cells (2 Sets)
1x 405-G-1 Lens
1x Tripod
2x Micro-Fiber Cloths
1x 14500/AA Size Battery Spacer/Dummy Cell
2x Battery Holders/Cases
2x Green GITD Dust Cap & Black Dust Caps
-2 Weeks Warranty on the diode - 1 month on the driver/click.
As long as you dint cause the damage i will replace that part fully on me under the Warranty time frame above...
Warranty will be voided if you attempt to open the laser. There is a Void Seal that if you try and unscrew the Head it will break that seal. SO PLEASE DO NOT OPEN THE LASER. Thank You.
Pictures:
Here is a Picture of all the Accessories you Get. There is the 2 sets of 14500 protected cells , 2x Battery Holders/Cases , Tripod , 2x Micro-Fiber Cloths and your 2x Dust Caps 1 Black & 1 GITD.
Videos:
There is Very little Fog in Both videos.
Showing The laser on the Cool Tripod:
Price:
$499 FREE Shipping Priority mail with TRACKING in the USA. International I will only Ship with Express mail so i will have to check how much it would cost for your country.
PM me or Post.
PLEASE NOTE: I will Not sell this laser to anyone that does not have proper Laser safety Goggles. If you dont have a pair of Laser Safety goggles and you are still interested in it i can recommend a good pair for you to buy or i can buy them for you and ship everything at once. Thank You.
:thanks: For Looking.!!!
Last edited: