- Joined
- Jun 7, 2012
- Messages
- 1,683
- Points
- 63
Up for sale is my "Black Beast" 445nm.
SOLD
It's a great host/heat sink setup, strong, powerful, and comes in any color you want as long as it's black.
Specs:
-M140 Diode
-1.81amp buck driver w/ individual aluminum heat sink
-CREE host that uses 2X 18650 batteries
-I purchased the diode pre-tested rated at putting out a solid 1.8W and peaking around 2.1W
-3 element lens with Black anodized focus ring and adapted external spring
-The diode is press fit directly in the middle of the 2 piece aluminum heat sink and the driver is soldered into the bottom of the heat sink creating a nice and if desired easily removable module.
You will receive everything here.
-CREE C8 Host
-Diode/Driver/Heat Sink module (nicely screws into the host)
-Lens w/ Black anodized focusing ring & adapted external spring
-2X 18650 batteries w/ charger
-ADDED BONUS: A vial of new generation glow pigment! Biologically and chemically inert, it can be added to anything from epoxy to nail polish.
Verification of the drivers 1.81amp output.
This stuff is so much fun.
One more beam shot, exposure was a little funny here but it doesn't exaggerate the beam, which is impressive.
This laser specifically has never been run for longer than 60sec, but I've seen this design run for 3+ minutes with no issues so duty cycle is at your own discretion. The black body and aluminum host dissipates/emits heat extremely well.
If your considering purchase you must already have goggles appropriate for this wavelength and be educated on laser safety. If you have any questions about laser safety please ask!
I'm asking $185 shipped US, $185 + additional shipping international.
Thanks :yh:
SOLD
It's a great host/heat sink setup, strong, powerful, and comes in any color you want as long as it's black.
Specs:
-M140 Diode
-1.81amp buck driver w/ individual aluminum heat sink
-CREE host that uses 2X 18650 batteries
-I purchased the diode pre-tested rated at putting out a solid 1.8W and peaking around 2.1W
-3 element lens with Black anodized focus ring and adapted external spring
-The diode is press fit directly in the middle of the 2 piece aluminum heat sink and the driver is soldered into the bottom of the heat sink creating a nice and if desired easily removable module.
You will receive everything here.
-CREE C8 Host
-Diode/Driver/Heat Sink module (nicely screws into the host)
-Lens w/ Black anodized focusing ring & adapted external spring
-2X 18650 batteries w/ charger
-ADDED BONUS: A vial of new generation glow pigment! Biologically and chemically inert, it can be added to anything from epoxy to nail polish.
Verification of the drivers 1.81amp output.
This stuff is so much fun.
One more beam shot, exposure was a little funny here but it doesn't exaggerate the beam, which is impressive.
This laser specifically has never been run for longer than 60sec, but I've seen this design run for 3+ minutes with no issues so duty cycle is at your own discretion. The black body and aluminum host dissipates/emits heat extremely well.
If your considering purchase you must already have goggles appropriate for this wavelength and be educated on laser safety. If you have any questions about laser safety please ask!
I'm asking $185 shipped US, $185 + additional shipping international.
Thanks :yh:
Last edited:
