- Joined
- Oct 14, 2011
- Messages
- 2,369
- Points
- 83
Hey guys :san:
So today i am offering you guys a true pocket monster!
It is using the uniquefire U2-S3 host. The specs are:
- Ben boost @ 1.2A
- 445nm 9mm diode
- Stock 9mm lens
- 16340 battery capacity
- copper 9mm module
Now on with the pics:
So you absolutely want to use an IMR cell with this one. Here is a lpm reading with the laser above room temperature. (I took a reading 1 min before and it was slightly higher but i accidently moved the laser from the sensor lol) So the minimum you can expect is this:
If you need an IMR cell it is available at extra cost. For duty cycles you absolutely want to keep it under 45 seconds and then 1 minute off. The heatsink is not very big but at this rate it should do fine.
I ask: $230 + shipping
P.S. You will have to be 18+ in order to buy this laser. Also you will need to know all the laser safety rules. When in doubt i have the right to reject a sale.
Thanks for looking :beer:
So today i am offering you guys a true pocket monster!
It is using the uniquefire U2-S3 host. The specs are:
- Ben boost @ 1.2A
- 445nm 9mm diode
- Stock 9mm lens
- 16340 battery capacity
- copper 9mm module
Now on with the pics:
So you absolutely want to use an IMR cell with this one. Here is a lpm reading with the laser above room temperature. (I took a reading 1 min before and it was slightly higher but i accidently moved the laser from the sensor lol) So the minimum you can expect is this:
If you need an IMR cell it is available at extra cost. For duty cycles you absolutely want to keep it under 45 seconds and then 1 minute off. The heatsink is not very big but at this rate it should do fine.
I ask: $230 + shipping
P.S. You will have to be 18+ in order to buy this laser. Also you will need to know all the laser safety rules. When in doubt i have the right to reject a sale.
Thanks for looking :beer:
Last edited: