- Joined
- Mar 29, 2013
- Messages
- 1,221
- Points
- 63
Hey guys. need to sell this bad boy to make roof for my upcoming PL445 - 1600mw purchase.
This is one of my masterpeices, but it has to go
Specs: M140 Diode
Driver: BlitzBuck driver @ 1.5 amps (conservative)
Heatsink: Custom MrCrouse Aluminum Heatsink
Battery Form Factor: 2 x 14500
LPM results: 1.634 watts (took the LPM pic one milliwatt too soon
) * my LPM TEC coating is sllightly degraded and i was using crappy batteries. Output may increase with better batteries
The body is made from one Sipik 68 hosts Combined with the lower part of a rayovac flahlight! There was alot of custom work that went into this build as the head of the sipik 68 was original adjustable, but we couldnt have that so i had to find a way to keep it from rotating separately from the body.
This thing is nice and thin, and has perfect patterns on the body for cool o-ring placement (see pics)
I will include spare o-rings so the buyer can customize his laser to his/her liking...
Enough! Here are some pics. More beamshots can be found here (the blue ones) http://laserpointerforums.com/f48/my-first-beamshot-thread-86559.html
Dem Beamshots (nothing used to bring out the beam
I am asking $175 + shipping (at most $5)
I WILL NOT SELL TO LOW POST COUNT MEMBERS OR PEOPLE WHO SOUND LIKE THEY ARE 12 I NEED TO KNOW THAT YOU WILL BE SAFE WITH THIS LASER, AND THAT YOU KNOW THAT ANYTHING THAT YOU DO WITH THIS LASER IS YOUR RESPONSIBILITY. IF YOU DO NOT HAVE SAFETY GLASSES AND YOU CANNOT PROVE TO ME THAT YOU CAN, I WILL NOT SELL YOU THIS LASER
Open to offers
Thanks for looking!
:beer:
-Matt
This is one of my masterpeices, but it has to go
Specs: M140 Diode
Driver: BlitzBuck driver @ 1.5 amps (conservative)
Heatsink: Custom MrCrouse Aluminum Heatsink
Battery Form Factor: 2 x 14500
LPM results: 1.634 watts (took the LPM pic one milliwatt too soon
) * my LPM TEC coating is sllightly degraded and i was using crappy batteries. Output may increase with better batteriesThe body is made from one Sipik 68 hosts Combined with the lower part of a rayovac flahlight! There was alot of custom work that went into this build as the head of the sipik 68 was original adjustable, but we couldnt have that so i had to find a way to keep it from rotating separately from the body.
This thing is nice and thin, and has perfect patterns on the body for cool o-ring placement (see pics)
I will include spare o-rings so the buyer can customize his laser to his/her liking...
Enough! Here are some pics. More beamshots can be found here (the blue ones) http://laserpointerforums.com/f48/my-first-beamshot-thread-86559.html
Dem Beamshots (nothing used to bring out the beam
I am asking $175 + shipping (at most $5)
I WILL NOT SELL TO LOW POST COUNT MEMBERS OR PEOPLE WHO SOUND LIKE THEY ARE 12 I NEED TO KNOW THAT YOU WILL BE SAFE WITH THIS LASER, AND THAT YOU KNOW THAT ANYTHING THAT YOU DO WITH THIS LASER IS YOUR RESPONSIBILITY. IF YOU DO NOT HAVE SAFETY GLASSES AND YOU CANNOT PROVE TO ME THAT YOU CAN, I WILL NOT SELL YOU THIS LASER
Open to offers
Thanks for looking!
:beer:
-Matt
Last edited:
Like above ^ you wont need any luck to sell this... Shame i'm in Aus where customs are extremely strict with lasers. NOTHING that is a 100% complete laser gets through the mail 
