JLSE
1
- Joined
- Dec 13, 2007
- Messages
- 3,580
- Points
- 0
*SOLD*
Up for sale is one bad little laser.. Its palm sized and puts out a hair under 1.6W on
a 'cold' start with a fresh cell. After all settles, its steady around 1.5W.
The optic is a glass 3 element so theres plenty of power and as good a beam
you can get without correction. When the focus ring is tightened all the way
down the beam is at 'parallel'. All steps have been taken to ensure a solid
action in the focus assembly. With a G1 aspheric the laser puts out 1.86W
and is optional to the buyer.
Heatsink is copper and 6061 aluminum, the LD mount is copper plated. All parts
are fitted together with arctic silver paste on top of a tight fit.
This laser also has 3 modes. These are selectable by a gentle 'tap' on the
switch when the laser is on. Power is these modes are as follows.
-HIGH 1.5-1.6W
-LOW 330mW
-PULSE 750mW
1 Battery , goggles, and case are included. Im still out of chargers so you will
have to supply your own. Battery size is 18350 and works with almost any Li-ion
charger.
Duty cycle in low is nearly unlimited. It takes several minutes just to get warm.
When used on high mode, it will come up to temp in about 1min. The battery should
last 40-45mins between charges..
There is also a threaded mount on the base for a tripod as seen in the pics. The
tripod is not included in this sale.
Warranty is for 2years from date of receipt. The warranty is void if tampering or
heavy abuse results in a failure.
This laser is unused and all new. Tested for stability and output only.
Asking price is 299. CDN O.B.O shipped anywhere. Expedited to the US and Express within
Canada including tracking and insurance. Guaranteed delivery.
PM or post if interested :beer:
Up for sale is one bad little laser.. Its palm sized and puts out a hair under 1.6W on
a 'cold' start with a fresh cell. After all settles, its steady around 1.5W.
The optic is a glass 3 element so theres plenty of power and as good a beam
you can get without correction. When the focus ring is tightened all the way
down the beam is at 'parallel'. All steps have been taken to ensure a solid
action in the focus assembly. With a G1 aspheric the laser puts out 1.86W
and is optional to the buyer.
Heatsink is copper and 6061 aluminum, the LD mount is copper plated. All parts
are fitted together with arctic silver paste on top of a tight fit.
This laser also has 3 modes. These are selectable by a gentle 'tap' on the
switch when the laser is on. Power is these modes are as follows.
-HIGH 1.5-1.6W
-LOW 330mW
-PULSE 750mW
1 Battery , goggles, and case are included. Im still out of chargers so you will
have to supply your own. Battery size is 18350 and works with almost any Li-ion
charger.
Duty cycle in low is nearly unlimited. It takes several minutes just to get warm.
When used on high mode, it will come up to temp in about 1min. The battery should
last 40-45mins between charges..
There is also a threaded mount on the base for a tripod as seen in the pics. The
tripod is not included in this sale.
Warranty is for 2years from date of receipt. The warranty is void if tampering or
heavy abuse results in a failure.
This laser is unused and all new. Tested for stability and output only.
Asking price is 299. CDN O.B.O shipped anywhere. Expedited to the US and Express within
Canada including tracking and insurance. Guaranteed delivery.
PM or post if interested :beer:
Last edited:
