Laser Pointer Forums - Discuss Laser Pointers

Laser Pointer Forums - Discuss Laser Pointers (http://laserpointerforums.com/)
-   Buy, Sell, & Trade (http://laserpointerforums.com/f39/)
-   -   SOLD.!!! 1.4W 445nm Laser The Cube "Polished" (http://laserpointerforums.com/f39/sold-1-4w-445nm-laser-cube-polished-70839.html)

lazeerer 01-22-2012 11:31 PM

SOLD.!!! 1.4W 445nm Laser The Cube "Polished"
 
SOLD>!!!!!!!!!!!!!!















Hey All,





For Sale: is a "1.4W"445nm Laser Called "The Cube" Polished.



The Laser runs off 1x 14500. I Highly polished the entire host up. This one in particular took a very long time. Alot longer then it normally takes me to do a host but it came out Awesome. I made a Custom focus adapter for it so this laser is Focusable by simple turning the front focus adapter. The Laser has 3 modes Hi,Med,strobe which is alot of fun. The Host is Solid aluminum and the way i designed the heatsink it really transfers the heat to the body very good making the whole body of the laser one big heatsink. Duty Cycle will be 1 minute on 1 minute off. The Laser feels amazing in your hand, nice and smooth feeling.:cool:


Here Is What You Get:

1x 1.3W 3 Mode 445nm Laser in Custom Host. "LPM Tested with Power Guaranteed"
1x AR Coated Glass Lens
1x Custom Focusing Adapter
2x Protected 14500 Batteries
1x Charger
1x Microfiber Cloth
1x Laser Safety Goggles/Glasses
1x Battery Case
1x Wrist Strap
1x Holographic Laser Warning Label rated "1.5W"

-2 Month Warranty on the diode - 2 month on the driver/click.
As long as you dint cause the damage i will replace that part fully on me under the Warranty time frame above....
Warranty will be voided if you attempt to open the laser. There is a Void Seal that if you try and unscrew the Head it will break that seal. SO PLEASE DO NOT OPEN THE LASER. Also if any signs of Abuse to the laser or Aggressive use or damage caused by the user then warranty will be voided. Thank You.



Here are the Picutres.....




Pictures:


http://i944.photobucket.com/albums/a...e/DSC01250.jpg
Everything you get.

http://i944.photobucket.com/albums/a...e/P1220478.jpg

http://i944.photobucket.com/albums/a...e/P1220480.jpg

http://i944.photobucket.com/albums/a...e/P1220482.jpg

http://i944.photobucket.com/albums/a...e/P1220483.jpg

http://i944.photobucket.com/albums/a...e/P1220487.jpg

http://i944.photobucket.com/albums/a...e/P1220498.jpg

http://i944.photobucket.com/albums/a...e/P1220494.jpg

http://i944.photobucket.com/albums/a...e/P1220489.jpg

http://i944.photobucket.com/albums/a...e/683_4822.jpg


Also I really do not like to post LPM picture in my for sale threads as over time i have noticed that many buyers would ask me not to show it and they will LPM it when them get it for a surprise as they know my lasers all come over spec.:D Those That want to see the LPM results that dont Have a LPM would always get it in PM. This is just my personal style.:)

None the Less here is what this guy is Doing about 1 minute in:
http://i944.photobucket.com/albums/a...d/DSC01318.jpg


Laser in Action: "With Fog"







Price:
$274 FREE Shipping priorty mail with TRACKING in the USA. International I will have to check how much it would cost for your country.



PM Me or Post.:)



As always.....

:thanks: For Looking.!!!

cheech226 01-23-2012 12:09 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
i owe ya a +1 when i can. absolutely awesome friggin' host. great polish, looks like a mirror

Moebius 01-23-2012 12:39 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Very unique!
You have a bright future in the laser **** business.
Good luck with your sale :beer:

scopeguy20 01-23-2012 12:42 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Pretty cool! And it won't roll, that can be a big + ! -Glenn

Bonubby 01-23-2012 12:49 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
PM Sent

Sigurthr 01-23-2012 12:56 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
You really make some of the most amazing builds, it's unbelievable.

I just hope I have some money to spend by time you start making some direct greens, haha!

blue bumblebee 01-23-2012 06:31 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
OMG this is just EPIC
bet this will sell within a day!

lazeerer 01-23-2012 06:34 PM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Thanks Guys for all the Nice Comments.:) Glad you all like it. The Polishing on this one due to all the flat surfaces was very time consuming and Hard. Almost as long as it takes me to polish up a Saik host.:p

This is a 1 off. I wont be making another one of these.

DJNY 01-23-2012 08:00 PM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Oh man, you´re going to make somebody happy again :)

InfinitusEquitas 01-23-2012 08:14 PM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Well... this is certainly a new take on making sure a laser doesn't roll:D

lazeerer 01-24-2012 04:14 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Quote:

Originally Posted by DJNY (Post 1021630)
Oh man, you´re going to make somebody happy again :)

:D I know you like the polish.;)

Quote:

Originally Posted by InfinitusEquitas (Post 1021638)
Well... this is certainly a new take on making sure a laser doesn't roll:D

I dint even think of the whole stop rolling thing.:)

offroadfreak8582 01-24-2012 01:13 PM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
damn i want a mode driver too :(

greetings,,

EDIT: And i forgot to say AWESOME LASER!! lol :)

lazeerer 01-25-2012 01:48 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Quote:

Originally Posted by offroadfreak8582 (Post 1021894)
damn i want a mode driver too :(

greetings,,

EDIT: And i forgot to say AWESOME LASER!! lol :)

PM me Again about this.





Also I would like to mention that the Laser Is also over spec Just like all my laser come.:D

InfinitusEquitas 01-27-2012 01:47 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
I'm curious how long did it take to polish?

It looks like you got it to a mirror quality:D

Polonium210 01-27-2012 03:46 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
That is a beautiful build!!

Do you use the stock 3 mode driver? If not where can I get one?

lazeerer 01-27-2012 05:38 AM

Re: FS: 1.3W 445nm Laser The Cube "Polished"
 
Quote:

Originally Posted by InfinitusEquitas (Post 1022994)
I'm curious how long did it take to polish?

It looks like you got it to a mirror quality:D

This one was close to how long it took me to do those saik ones. It was round 7 hours to do this host. Not straight but over a few days i did it.:) I Love Polishing.:wave:

Its a Mirror for sure.:cool:



Quote:

Originally Posted by Polonium210 (Post 1023046)
That is a beautiful build!!

Do you use the stock 3 mode driver? If not where can I get one?

Its a custom driver with a custom mode board. Just like i mentioned to you in PM.;)

________________________________________________




Also I really do not like to post LPM picture in my for sale threads as over time i have noticed that many buyers would ask me not to show it and they will LPM it when them get it for a surprise as they know my lasers all come over spec.:D Those That want to see the LPM results that dont Have a LPM would always get it in PM. This is just my personal style.:)

None the Less here is what this guy is Doing about 1 minute in:
http://i944.photobucket.com/albums/a...d/DSC01318.jpg

:D


All times are GMT. The time now is 07:03 AM.

Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC