Sell Red Laser Pointer 300-350mW. Handmade.

New price is 3 times cheaper! I sell Red Laser pointer 300-350mW. Handmade.

Hi, guys! =) Check this VIDEO!

New price. See below! :drool:

Features laser pointer:

Color laser: red.
Wavelength: 650nm
Optical power continuous: 300-350mW
Current consumption: 500mA
Operating voltage: 3.4-6V
Operating temperature: 0-40 degrees.
Power Supply Type: 3 elements of the AAA, as conventional batteries, so battery type.
Operating time:> 30 min.




Do you like this laser pointer? Do you want to buy it? I can do this laser pointer for you! It cost (see below)! Laser Power - 300-350 mW! I can deliver anywhere in the world. My site on Russian language, but I well know English language, so if you want to make orders, please contact me directly by e-mail: adminsea@googlemail.com

P.S. Visit my translated website on English (for Russian visitors www.SuperLazer.Ru)

tags: laser pointer, red laser pointer, lazer pointer, red lazer pointer, power laser pointer, super laser, superlaser, laser show, danger laser

OMG thats amazing! i want 20 of them!
i don't have any rubles though

Those are some nice looking hosts.

I am glad that you liked my device Payment is not a problem! Rubles pay only living in Russia. For other clients(for you), it is possible to make payment by US dollars. Payment by plastic card, or some online wallets

If you ready to order, I will send you payment details. When payment is confirmed, I will proceed to the assembly of laser pointer for you, and then send to your address by DHL.

I want to say straight away that I had not committed fraud, has long been working in the laser direction, although in Russia. I want to enter international market, because I have something to offer.

Though the price is slightly high for me, you should still be able to sell some here on the forum Those are some nice looking hosts, especially with a side-clickie. Is the button momentary or can you click it on and then release the button?

Seb

2 Jaseth:
Thank you for your question ;-) I have a button with a fixation, ie pressed, let it burn, once again pressed - was extinguished.

Dear visitors of this topic! Check out my new design. The heavy-duty laser pointer, power 300-350 mW!

I think that the laser pointer you more like the design and other parameters.






• A thin ray protective glass allow light a match and melt the plastic directly from the water!
• Not afraid of dust, in the case of pollution clean elementary, is only rinse or wipe the protective glass and the laser shines like new again!
• Charger, which comes fully charge the battery for 3 hours.
• Full battery charge is enough for 4.5-5 hours of continuous operation.
• The laser is ideal to take with you on hikes, rafting, fishing without thinking about the possible damage!

Features:
Optics continuous power (MW) ... ... ..... ... .... .. 300-350
Supply current (mA) ... ... ... ... ... ... ... ... ... ... 500
Operating time (min) ... ... ... ... ... ... ... ........... > 30
Operating temperature ... ... ... ... ... ... ... ..... .. 0-40
Power Supply Type ... ... ... ... ... ... ... ... .... ... battery 2500ma * h
Operating Voltage (V) ... ... ... ... ... ... ... ......... 3.4-6

Options:
Laser: 1 piece
Li-Ion Battery 2500mA * h: 1 piece
Charger Li-Ion Battery: 1 piece

Wow nice units but prices are way too high =-
what diode are you using btw
driver ?
lense ?
warranty ?

and look under 60

Rayfoss

ZOMG an ultrafire red laser for only $450! you better start making LOTS more of them, they are going to be sold out in no time!!

500mA? What diode is that?

what diode are you using????? we barely get 350mW's with an LOC diode in a press fit copper heatsink (lab style) cooled running at 450ma with a meredith lens mod... how are you achieving this amount of power?? and you must have an LPM. do you have any power readings we can see, graphs, a shot of you measuring the 350mW's on an LPM...?

If you dont, I will meter one for you for free, becaus i truely believe your lasers will not sell without REAL power results, honestly. i'm just trying to help, because those are GORGEOUS hosts!!! and the video shows them burning pretty good. but a power reading would help your sales allot i bet.

and I agree wil John_Lawson, These are WAY too expensive. for $400 flat, you can get a 400mW blu-ray burner from me. (not trying to thread jack, sorry) jus letting you knot that lasers like this (ecspecialy red) are quite cheap... I sell 300mW red lasers in pocket minis's for $170 in a pocket mini... just a little price comparison to give you an idea of what people are willing to pay...

Tyler - Dark Lasers

Nice hosts, but the prices are very steep

And I'm a loyal Dark customer lol

john_lawson said:

Wow nice units but prices are way too high =-
what diode are you using btw
driver ?
lense ?
warranty ?

Click to expand...

Diode: 300mW, 650nm
Guarantee: Of course there is! If something happens with laser pointer, I correct / change / repair. During my work, there were no problems.
Lens: acrylic drilled short-focus lens.

Driver:
Power of the laser diode is made on the stabilized driver. Also applied thermal stabilization scheme. Thus, the output power is always at the maximum level regardless of ambient temperature and the state of power supply. Thus, no matter what you as a power source, three AAA batteries, or three batteries, or connect to your computer's USB, power output will be constant.

See the file as an attachment, there is my article about the driver with images.

I add even a short description of my laser pointer, I think some visitors will be interested to read:

This laser beam through a thin stabilized and able to feed without any configuration (refocusing) from several meters to light matches and burst balloons. Laser power is sufficient to effectively light a cigarette.

Now a little more about the individual properties of the laser.

Beam diameter of about 1 millimeter, it allows to increase several times the power density compared with other lasers. It is this option allows you to not changing the focus as light a match and shine to the clouds. All of these features are achieved by a short-focus optics with enlightenment in the red spectrum.

Power of the laser diode is made on the stabilized driver. Also applied thermal stabilization scheme. Thus, the output power is always at the maximum level regardless of ambient temperature and the state of power supply. Thus, no matter what you as a power source, three AAA batteries, or three batteries, or connect to your computer's USB, power output will be constant.

Each laser is a test run. Connects to the power supply and operates within an hour continuously.

For lifetime. Honest answer, I do not know at this point how much of the laser diode, but almost 2 years ago was sold to the first laser, sales were more than 180 pieces, none of the laser is not broken, so actually I can not answer this question.

Regarding the driver wanted to add: I have tried and developed a great driver! It is independent of the power supply maintains the output power at 300 mW! Ie not have to worry about replacing batteries in battery power drops and the effect of the first three seconds, then removed. Power always 300 mW, while the batteries do not sit down. By the way, and the temperature is controlled more! There were cases when the laser was burning from the cold. On cold increases efficiency and the laser fails. My driver watches the temperature and cooling gradually reduces the current through the diode. He experienced to 0 degrees, it works!

Immediately warn - anywhere in the network you don't find description of this driver and not ask me, that I gave the scheme - is useless. In his article, I cited only a rough scheme of the driver, but not one that is used in my laser​

Can you post a link or spec sheet of the diode? Just saying 300mW diode is kind of vague.

I think people want to be sure you are not just over-driving a diode.

EDIT: @mohrenberg, you crack me up!