LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
On Sale Now - The Cypreus II - A Copper Laser host by Sinner [25/25 Shipped]
- Thread starter sinner
- Start date
NKO29
0
- Joined
- Jun 6, 2013
- Messages
- 861
- Points
- 28
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
MUST resist!
MUST resist!
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
They're going to be exactly the same, just shorter/longer from the handgrip. I will definitely post some photos when they are made. Thanks for the suggestions man!
Thanks man, I'll be happy to make one for you :thanks:
They're going to be exactly the same, just shorter/longer from the handgrip. I will definitely post some photos when they are made. Thanks for the suggestions man!
The inner one was made from Grade-5 Ti 6Al4v , has a Copper core and Jmillerdoc already has a $800 diode (1W 520) in it
Sorry wanted to give you some rep for these awesome builds and your fantastic service, but I have to spread some first...
Thanks man, I'll be happy to make one for you :thanks:
Last edited:
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
Are they modular? It would very (very) nice if we could in the future buy a battery body only, and then extend or shorten to "upgrade" our Cypreus II.
-Jim
Are they modular? It would very (very) nice if we could in the future buy a battery body only, and then extend or shorten to "upgrade" our Cypreus II.
-Jim
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
Im afraid the physical strength will be compromised that is why I am offering all three versions. And how often do you change the battery size anyways. This is a rock solid design you can run a car over it.
Im afraid the physical strength will be compromised that is why I am offering all three versions. And how often do you change the battery size anyways. This is a rock solid design you can run a car over it.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
I can safely say 3-5 minutes @3W+ , the heat distribution on this host is excellent, the copper should take care of the 6W+ diodes without a doubt.
I can safely say 3-5 minutes @3W+ , the heat distribution on this host is excellent, the copper should take care of the 6W+ diodes without a doubt.
IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
One suggestion petters....go for an XL. With a diode that powerful do you really want 5 minute battery charges? 2 x 18650's will run the beast FAR longer than a couple of 18350's.
One suggestion petters....go for an XL. With a diode that powerful do you really want 5 minute battery charges? 2 x 18650's will run the beast FAR longer than a couple of 18350's.
- Joined
- Mar 10, 2013
- Messages
- 2,918
- Points
- 113
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
this one says it all...
this one says it all...
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
I just make sure everyone keep building new lasers.
Edit: 7 Ordered, Presale will run for another couple of weeks so plenty of time for everyone to hop on.
:beer:
I just make sure everyone keep building new lasers.
Edit: 7 Ordered, Presale will run for another couple of weeks so plenty of time for everyone to hop on.
:beer:
Last edited:
NKO29
0
- Joined
- Jun 6, 2013
- Messages
- 861
- Points
- 28
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
Really considering the XL... These hosts have kept me coming back to this thread the whole day lol :beer: You have done a great job sinner once again. I have a question that i'd like to pm you Shame I cannot rep you
Josh
Really considering the XL... These hosts have kept me coming back to this thread the whole day lol :beer: You have done a great job sinner once again. I have a question that i'd like to pm you
Shame I cannot rep you Josh
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
Sinner going to have to hold up on my order.... damn you wbs I am currently sitting here putting together 2 old hosts to imagine how the XL would look dimension-wise, haha. The extra $30 brings it kind of out of my price range but still a serious consideration.
Sinner going to have to hold up on my order.... damn you wbs I am currently sitting here putting together 2 old hosts to imagine how the XL would look dimension-wise, haha. The extra $30 brings it kind of out of my price range but still a serious consideration.
Last edited:
IsaacT
0
- Joined
- Aug 25, 2010
- Messages
- 5,947
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
30 bucks extra yes. But a preorder. So there is time to find the money I have never been happy with a 445 that has a small battery configuration. Search for 2x18650 host and look for pics. Usually about 10 inches long.
30 bucks extra yes. But a preorder. So there is time to find the money
I have never been happy with a 445 that has a small battery configuration. Search for 2x18650 host and look for pics. Usually about 10 inches long.
sinner
0
- Joined
- Oct 27, 2011
- Messages
- 2,565
- Points
- 83
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
It will be just a couple of inches longer (arround 8.5") with 2x18650. It only depends on ones personal preference, the 2x18350's will give you a decent runtime at 2.3Amps (21minutes) I have the 9mm doing 3.5W+ in MS-Envy and I never had batteries run out much often despite of extended use.
Secondly if you dont want to spend the extra $30 , spare batteries are cheaper and you can still use a more compact built laser at the exact same power so like I said whatever is your personal preference.
Unless the 6W+ setup, that requires 3.5Amp+ the 18350's will still work but they will only last 12minutes.
It will be just a couple of inches longer (arround 8.5") with 2x18650. It only depends on ones personal preference, the 2x18350's will give you a decent runtime at 2.3Amps (21minutes) I have the 9mm doing 3.5W+ in MS-Envy and I never had batteries run out much often despite of extended use.
Secondly if you dont want to spend the extra $30 , spare batteries are cheaper and you can still use a more compact built laser at the exact same power so like I said whatever is your personal preference.
Unless the 6W+ setup, that requires 3.5Amp+ the 18350's will still work but they will only last 12minutes.
- Joined
- Oct 3, 2011
- Messages
- 899
- Points
- 0
Re: Presale - The Cypreus II - 1x18650/2x18350 - A Copper Laser host by Sinner
Got my MS-SSW-II and second copperhead yesterday, they are sweeeeeet! Man, the MS-SSW-II is an amazing build. Beefy yet elegant at the same time. Quality all around, one of my favorites (next to the custom Titanium of course). I must say Sinner, you've got skills. Both in design and execution. The only person I haven't received a host from yet is Jayrob (paid for a custom C-mount that is still in the works) and so far I am most impressed with your builds. That's not to detract from the others, they all make fine stuff too. It's that yours get my adrenaline going like no others do. You have set the mark high guy!
This newest Copper Cypreus-II is fantastic looking in the pictures so I know in person it will blow me away. I can't wait to get it. The Titanium one is very cool too but I almost wish I would have waited for this one to arrive before I made my decision to mate the Ti with the 520nm 1w.
I am really looking forward to seeing what's up your sleeve for the next design.
Question, in the title MS-SSW-II, what's the MS stand for?
Thanks for all your work for is here at LPM, +'s to you!
Jmillerdoc
Got my MS-SSW-II and second copperhead yesterday, they are sweeeeeet! Man, the MS-SSW-II is an amazing build. Beefy yet elegant at the same time. Quality all around, one of my favorites (next to the custom Titanium of course). I must say Sinner, you've got skills. Both in design and execution. The only person I haven't received a host from yet is Jayrob (paid for a custom C-mount that is still in the works) and so far I am most impressed with your builds. That's not to detract from the others, they all make fine stuff too. It's that yours get my adrenaline going like no others do. You have set the mark high guy!
This newest Copper Cypreus-II is fantastic looking in the pictures so I know in person it will blow me away. I can't wait to get it. The Titanium one is very cool too but I almost wish I would have waited for this one to arrive before I made my decision to mate the Ti with the 520nm 1w.
I am really looking forward to seeing what's up your sleeve for the next design.
Question, in the title MS-SSW-II, what's the MS stand for?
Thanks for all your work for is here at LPM, +'s to you!
Jmillerdoc
