Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

For sale: Jayrob MXDL host PHR@110mA *Mint*

Asherz

Asherz

0
Joined
Jan 18, 2009
Messages
1,623
Points
0
Hi people,

Looking to sell my Jayrob MXDL laser with PHR@110mA using a rckstr driver, it's been looked after VERY well, stays inside a protected box most of the time and gets used very little.

Just to add, replacing the PHR module would be easy, I had the host setup so there's just two wires in the pill that can be connected to two wires from module with a diode/driver.

Running a little low on money at the moment hence the reason for selling, the laser is working great, and the host is like new.

img8767.jpg

img8768c.jpg

img8777.jpg

img8781.jpg


Some pictures and things, I am open to offers.

Cheers.
 
Last edited:





Asherz

Asherz

0
Joined
Jan 18, 2009
Messages
1,623
Points
0
Whodunit13579 said:
Do you know the wattage?
Click to expand...

It's a PHR-803T diode set at 110mA so should be putting out around 100mW give or take on a full charge.

Since the wavelength is lower (405nm) it still burns well and has a dark purple visible beam in the dark.
 
Whodunit13579

Whodunit13579

0
Joined
Apr 9, 2010
Messages
134
Points
0
Actually sorry, but another deal just went through for me and I don't need this now.
Andrew
 
Asherz

Asherz

0
Joined
Jan 18, 2009
Messages
1,623
Points
0
BERFIN said:
what is its power output?
and will you put a video of it preforming
Click to expand...

As I said earlier in the thread, the driver is set at 110mA which is a perfect balance between power and life span for this diode, it's putting out around 100mW on a full charge.

This build would also be fantastic opportunity to replace the diode with something more powerful as well, since there's already a driver in the current module and the host has room for two 4.2V rechargeable which are more than enough to power a more powerful diode for decent periods of time. The large heatsink also allows for good heat transfer keeping the diode cool.

As for a video yes I can get one done if you want.
 
You must log in or register to reply here.




Top