- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Custom copper sink laser in progress.....
Custom copper sink laser in progress.....
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Red/blu ray
- Thread starter LikeitBright
- Start date
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
) from the tool holder. And a little cutting oil. And finally a little autosol to polish.
I use a high spindle speed with shallow cuts and rigid setup so keep the working length to a minimum and also your tool only protruding as little as possible (sounds dodgy I knowzaugger said:Hey LikeitBright Did you sand/polish that copper heat sink when you took it off the lathe? Whenever i work with copper theirs always a small amount of chattering i cant seem to stop
) from the tool holder. And a little cutting oil. And finally a little autosol to polish.- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Dark_Star, your customs stainless ultrafire x4 blu ray/red burners with recessed copper sinks are ready!
Dark_Star, your customs stainless ultrafire x4 blu ray/red burners with recessed copper sinks are ready!
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Re: Custom built lasers:Red/blu ray - choose your
Dang dude... Those are SCHWEET!
It looks like you machined the threaded focus ring on the red... Is that because it is the longer AixiZ glass lens?
Jay
Dang dude... Those are SCHWEET!
It looks like you machined the threaded focus ring on the red... Is that because it is the longer AixiZ glass lens?
Jay
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
, it was a lot of work making these.
Yup, in order to met the length specs I had to thread it all the way through. Those glass lenses are signifantly longer than the plastic acrylic ones. Thanks for the commentsjayrob said:Dang dude... Those are SCHWEET!
It looks like you machined the threaded focus ring on the red... Is that because it is the longer AixiZ glass lens?
Jay
, it was a lot of work making these.- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Hey Jack, your custom laser with copper sink is ready
Hey Jack, your custom laser with copper sink is ready
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
If you have all those components it would be simpler to install a driver yourself unless you need machining? Keep in mind I'm in NZ.Th0ughts said:
- Joined
- Apr 1, 2008
- Messages
- 3,924
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Boy Chris, Did those turn out NICE GREAT JOB SOMEBODY's gonna be REAL HAPPY
Boy Chris, Did those turn out NICE
GREAT JOB SOMEBODY's gonna be REAL HAPPY - Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Hey Rob, I've finished the custom sink for your green module.
I used a copper sleeve for maximum heat transfer.
Hey Rob, I've finished the custom sink for your green module.
I used a copper sleeve for maximum heat transfer.
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Custom built lasers:Red/blu ray - choose your
Aixsyd, your custom copper burner.
Aixsyd, your custom copper burner.
