Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Qumefox's FOR SALE thread. Hosts, lenses, etc.

Joined
Dec 17, 2010
Messages
1,144
Points
48
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Saweet! PM sent for payment info...:beer:
 





Joined
Mar 26, 2010
Messages
3,220
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Ok, removing people from the 'tentative' list as they pay. I should get these shipped tomorrow for those who have paid before then.
 

jakeGT

0
Joined
Oct 29, 2010
Messages
3,532
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

My lpc-815 build jumped from 250mW with a red coated aixiz glass up to 285mW with your red ar coated acrylic fume, great buy for $4 !
 

xuen7

0
Joined
Mar 5, 2011
Messages
121
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Is mine the 2nd one at the 2nd row!?!?! =D didnt receive any PMs from you so i thought i will just invite myself... I need those lens maybe 3 650 and 2 445, are there anymore goodies that you wanna sell so that ehem i can save shipping>? hahaha batteries? drivers? anything more???

Ok people, those on the list who have told me they wanted a host so far, PM me with a list of everything your wanting.. host, lenses, etc, and i'll get you totals and give you my paypal address. This batch is close enough to being done that i'll start taking payments. Also, looks like the tripods will get here tomorrow as well, so everyone will be getting complete packages.

IMG_0145.JPG
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Is mine the 2nd one at the 2nd row!?!?! =D didnt receive any PMs from you so i thought i will just invite myself... I need those lens maybe 3 650 and 2 445, are there anymore goodies that you wanna sell so that ehem i can save shipping>? hahaha batteries? drivers? anything more???

I made a post here.. the same one that pic was in, stating people needed to PM me with their complete order and i'd get them the total.

As far as other stuff... I have about 100 scavenged non-protected 18650's, and a few NJG-18 drivers as well. If your interested in the batteries i'll just have to test a couple to make sure they aren't total crap, though all the ones I kept don't self discharge.. at least not quickly anyway. My preliminary sorting flushed those out. I also have a couple of wf-139 chargers I could part with as well. Though in the future i'll probably stock wf-188's, though I doubt they'll be any cheaper than DTR's.

If your interested, shoot me a PM, and i'll come up with a price.

I also have some new GTK 3000mAh (yeah right. heh) protected 18650's but these are too long to work in these hosts, which is why I bought them.. they're the longest I could find, so I could try and figure out how to make them work in these lights, which I haven't gotten around to yet due to spending most of my free time making heatsinks. :p

Anyway, i'm heading over to the office right now actually to get the hosts people have paid for already packed up and out the door.
 
Joined
Mar 26, 2010
Messages
3,220
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

That's a 14% increase. Not too shabby. Glad you like it.

My lpc-815 build jumped from 250mW with a red coated aixiz glass up to 285mW with your red ar coated acrylic fume, great buy for $4 !
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Just to throw this out there I have gotten two requests and built them for customers that are looking for a nice driver/diode combo that is a no solder solution for this host. I talked with Qumefox and he is going to be offering these down the road but at the moment does not have the time to do them so I will offer them to you guys until he gets the time to get them going.

This is a no solder solution that will have the driver set to either the 5 modes or straight wired for full power all the time with the spring mod on the driver for contact in the host. You can have the high current set to 1350mA or under. All you need to do is slide it into the hosts module/heatsink, tighten down your setscrew, then press your driver in place and your are done.;)

$75 shipped US.:beer:

p1015665.jpg
 
Last edited:
Joined
Mar 26, 2010
Messages
3,220
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Don't forget to use thermal grease. lol. Though personally i'd recommend using the cut off aixiz backs for 'high power' builds just for the additional surface area contact to the heatsink. But that would require unsoldering these modules of DTR's.

I'll also mention that when I get the next batch of lights i'll have a few 'scratch and dent' specials that will be for sale cheaper. They're mostly just heatsinks that I screwed up on.. but not majorly. There will be 5 total (right now) the 4 aluminum ones are fine cosmetically, only a fin shorter than normal. And the copper one I slipped and drilled the setscrew hole at an angle on.. oops. But it's still perfectly usable. Just doesn't meet my QC for 'full price' heh. You can see one of 'short' aluminum ones in the 'additional machining' pic in the OP.
 
Last edited:

xuen7

0
Joined
Mar 5, 2011
Messages
121
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

hi dude, hope i can make it in time., so lets see erm from what i see in the first page, i ordered the alum host 47.50. also i would need about 3 lens in aixis so thats about 21 - 30ish anyways just send me the paypal money request to drug72@hotmail.com and i will make the payment asap
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

I'd recommend using the cut off aixiz backs for 'high power' builds just for the additional surface area contact to the heatsink.

I have not used the backs of the modules in any of my builds before but I could certainly add cutoff ones with the modules for anyone that wants it.:beer:
 
Last edited:
Joined
Mar 26, 2010
Messages
3,220
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

hi dude, hope i can make it in time., so lets see erm from what i see in the first page, i ordered the alum host 47.50. also i would need about 3 lens in aixis so thats about 21 - 30ish anyways just send me the paypal money request to drug72@hotmail.com and i will make the payment asap

You you originally told me you wanted a copper heatsink so that's what I built. Once I add the set screws, the heatsinks become matched to the host, so there's no swapping them and still have it line up right on the bottom.

If you want to change your order to an aluminum heatsink, you'll have to wait until the next batch of lights show up. Also, in a previous post, you said you wanted 3 650 lenses and 2 445's, and in this last one, you just said '3 aixiz lenses'

Which is it? I can't give you a total when i'm not quite sure what it is your ordering.
 
Joined
Dec 17, 2010
Messages
1,144
Points
48
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

That's a good deal for a plug and play setup. :beer:

Just to throw this out there I have gotten two requests and built them for customers that are looking for a nice driver/diode combo that is a no solder solution for this host. I talked with Qumefox and he is going to be offering these down the road but at the moment does not have the time to do them so I will offer them to you guys until he gets the time to get them going.

This is a no solder solution that will have the driver set to either the 5 modes or straight wired for full power all the time with the spring mod on the driver for contact in the host. You can have the high current set to 1350mA or under. All you need to do is slide it into the hosts module/heatsink, tighten down your setscrew, then press your driver in place and your are done.;)

$75 shipped US.:beer:

p1015665.jpg
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

That's a good deal for a plug and play setup. :beer:

Thanks.:beer: Check out the three I built tonight. I added a cutoff backside and even sanded the plating off for maximum thermal transfer.:evil:

p1015668.jpg
 
Last edited:
Joined
Dec 17, 2010
Messages
1,144
Points
48
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

Nice. I am really liking these NJG-18 drivers. I've been using them for all of my builds lately. Pretty convenient mounting them too; just cut a groove in with the lathe and pop it in. Keep up the good work DTR & Qume! :cool:
 

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

They are pretty decent drivers for 445 diodes as an alternative to the flex and qumefox definitely has a hot item with this host.:beer:
 

xuen7

0
Joined
Mar 5, 2011
Messages
121
Points
0
Re: Sipik HK21 18650 hosts + 405/445nm and 650nm lenses

You you originally told me you wanted a copper heatsink so that's what I built. Once I add the set screws, the heatsinks become matched to the host, so there's no swapping them and still have it line up right on the bottom.

If you want to change your order to an aluminum heatsink, you'll have to wait until the next batch of lights show up. Also, in a previous post, you said you wanted 3 650 lenses and 2 445's, and in this last one, you just said '3 aixiz lenses'

Which is it? I can't give you a total when i'm not quite sure what it is your ordering.

Sorry for the caused confusion, i could swore i saw Alu beside my name previously which is why i just conveniently assumed you made the alu for me.. anyways if its copper so be it thats cool with me too and probably cooler for the laser! Anyways as for the lenses, lets set them at 3 650 and 2 445 to with that i suppose my grand total should come up to... 7.50 + 7.50 + 3.50 + 3.50 + 3.50 + 57.50 = ( 93.5 + shipping to Singapore ) = ???

Mr DTR you are up next!!! lemme hunt for our previous arrangements in PM..
 
Last edited:




Top