Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Quack's moving across the country sale

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
Hey guys.

So, long story short, I'm moving across the country and can't bring like 99% of my electronics stuff with me.

So you guys get to buy my stuff, what joy!!
(none of the pics will be shown on here, you gotta follower linkies.)

----------------------------------------------------------------------------------------
Mini Wireless Power Demonstrator

http://i.imgur.com/z6hWTM2.jpg

I built this quite a while ago. It's in essence a ZVS driver, built with some slight modifications to allow for super low current draw. It runs off of one 9 volt battery. The UV LED gets pretty bright when you get close to the transmitter and is a pretty fun toy to play around with, and can mystify your friends saying "WIRELESS VOODOO". Doesn't get even the slightest bit hot, either. Comes with a personal warranty of mine; If it breaks within 3 months of you getting it, I'll refund your money and you can send it back and I'll figure out where I went wrong. Don't abuse this though. I will come for you if you do.

Asking $25 for this lil dude. Also $5.5 shipping.
----------------------------------------------------------------------------------------

Second misc. pack.

Imgur

2 red 650 nm diodes, one pulled from a BD-burner sled, and one from a SHOWXX pico projector.

They're both 3.8 mm diodes, one is already pre-mounted in a copper module. Can include a AR-coated acrylic with it.

The one pre mounted is the SMOC one from the BD-drive, it should be able to handle roughly 400-450 mA. Asking $15 for it since it's premounted. If you want the AR-coated lens with it add another $2 with it.

The one from the showxx should be able to handle about 200-250 mA. I'm asking just $7 for it.

I also have a PHR-805T diode I removed from a pen. It can take 110 mA and is perfect for lil diode builds. Asking $10 for it. I can also push it in a module for another $5 including a basic acrylic lens.

And then one of those corning G-1000 green modules, it puts out 530 nm light. It's a lil tricky to get it working right but it's very powerful for the size it is. Asking $20 for it.

If shipping costs are not explicitly stated, I'll give the cost estimate when you let me know what you want to buy. Everything small should be $2. If you combine stuff together I'll knock a dollar or two off.

I can potentially take trades, depending on what you're offering.

Thanks for looking/perusing! :wave:
 
Last edited:





Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
I think that odd size you are referring to is an 18500 as I have (2) in a LiFePO4 that are exactly as you describe
 

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
AHhhh, that's the size.

Empty metallic mini host, the marbles and the modules are taken.
 

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
Bumping this since I still have everything listed, and need the monies.
 

Jstr

0
Joined
Feb 10, 2014
Messages
347
Points
0
What exactly does the showxx sled require for making a white laser? If it's not too difficult, I'll take it. :)
 

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
As far as I'm aware, you'd just need to align everything. A Red, blue, and green diode put into the correct spots on there and you should have white output.

But the alignment itself is the tricky bit.
 

Jstr

0
Joined
Feb 10, 2014
Messages
347
Points
0
Ah, I would get it, but I just realized I don't have any good diodes for right now. If it's still available, I might buy it later. I've always wanted a white laser :)
 

Hiemal

0
Joined
Dec 27, 2011
Messages
1,443
Points
63
Bump. The little showxx module thing is gone. Everything else is still available.
 




Top