Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Prices Drop! 501B Kits (Plug-N-Burn add a Module w/ Driver!) Starting at $20ea

Joined
Jul 10, 2009
Messages
1,476
Points
63
Tried PM'ing you about a few of these, never got a response back.

Responded now. I get a lot of messages and sometimes they slip through the cracks, so if I don't respond after a few days, message me again, or better yet post on one of my threads. If someone posts on my threads, I get an email notification. Not for PM's though.

Wondering if you would ship to Australia? I'd take a black knurled knob kit off your hands.

Yes we can ship to Australia, I'll get you a shipping quote.
 





Joined
Apr 1, 2012
Messages
199
Points
0
Responded now. I get a lot of messages and sometimes they slip through the cracks, so if I don't respond after a few days, message me again, or better yet post on one of my threads. If someone posts on my threads, I get an email notification. Not for PM's though.

Understood, I replied back to your PM that you sent back to me, just need your email so that I can pay for the three hosts that we discussed.
 
Joined
Apr 24, 2013
Messages
549
Points
43
Put me down for a blue with no knob.
PM me with payment info.
Thanks
Ed
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
My Zaser handles the heat of a 9mm very well. And is probably one of the best hosts I have.
 
Joined
Sep 20, 2013
Messages
17,254
Points
113
Tmack, how much we talking about here? I mean in total, shipping, handling, and the whole nine yards? I am interested but may have to wait until 2/3/14 to purchase. Will be anxiously awaiting your response. Thanks, Paul
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
Oh I was saying mrcrouse makes Zasers. I wouldn't hop on someone's thread offering to sell something :)

Mrcrouse will gladly make you one, if he doesn't have any ready. I believe they are $115

My Zaser is my baby!
 
Last edited:
Joined
Sep 20, 2013
Messages
17,254
Points
113
Mike, I am about to start on my first 445 nm 9 mm build and was so impressed by your 501B I'm sure you will have something that will work well for me. Money is a little tight right now, but that will change soon. I'm thinking of something very functional, not necessarily really awesome looking. I'm going after 3 watts so it will have to have a good heat sink and I would like to get a reasonable duty cycle out of it. Tmack told me about your Zaser that he got from you, but I don't know what you may have in mind. Please get back to me when you have the time. Thanks, Paul
 
Joined
Jul 10, 2009
Messages
1,476
Points
63
Hi, well the host design is up to you. All of our custom hosts have great heatsinking capabilities. The Zaser however does have a bigger heatsink. It is up to you really. We can do other custom work as well; build it however you want.
 
Joined
Jan 28, 2014
Messages
12
Points
0
Im just inquiring about your 501b heat sinks. I have been keeping an eye on your work and ive been meaning to make my own heat sinks. However it looks as though you know what your doing and your work looks great. I own 5 × ultrafire housings.

Are you able to sell me 5 × heat sinks (only - separate to housing) with the contact boards and the knurled focus knob?

What are the dimentions for the driver behind the contact board housing?

If i was to have you redesign the standard 501b Heat sink, can you make it protrude a further 10mm out of the housing bezel?

I understand the postage cost, are you able to post to Australia?

If all is possible can you please send me a quote?

my email is: elliotlindsay@hotmail.com

Thanks heaps
Elliot
 
Joined
Jan 29, 2014
Messages
79
Points
0
Are you guys able to make a custom blue host with a 445nm diode and module ready to run out of the box?
 
Joined
Jul 10, 2009
Messages
1,476
Points
63
Are you guys able to make a custom blue host with a 445nm diode and module ready to run out of the box?

We do not sell complete lasers, but we can work with someone else to get one built for you. The other and cheaper option is to buy a module from DTR:

https://sites.google.com/site/dtrlpf/home/diodes

That already has the driver attached. Then all you need to do is solder those leads to our leads, cover them in some heatshrink etc. and you're good to go.
 
Joined
Jan 29, 2014
Messages
79
Points
0
We do not sell complete lasers, but we can work with someone else to get one built for you. The other and cheaper option is to buy a module from DTR:

https://sites.google.com/site/dtrlpf/home/diodes

That already has the driver attached. Then all you need to do is solder those leads to our leads, cover them in some heatshrink etc. and you're good to go.

Sorry if this is a dumb question but if I buy the black no knob kit to focus the beam I would just turn the small ring on the diode/module that was pressed in?
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
The module will have a lens that has a small ring to adjust focus. (very small)
 




Top