Not FS: 300mW MXDL Open Can Lasers!

jayrob · Aug 6, 2008

Re: FS: *300mW MXDL Open Can Lasers With Heatsink*

Paradox3713 said:
Roger that! Like sweet! Thanks alot Bro. Too freaking kewl.

'Tac'

Not sure if this is your first high powered burner or not, but just as a reminder to any new ones out there...

These builds can be very dangerous! Proper eye protection is recommended (even for burning). Please don't shine it at people, or even animals. A direct eye shot can blind you pretty much instantly...

Anyway, let me know when you get it!
Jay

Paradox3713 · Aug 8, 2008

Re: FS: *300mW MXDL Open Can Lasers With Heatsink*

Got it yesterday Bro. Just freaking awesome! Thanks a million! I'm already thinking about one of your blu-rays since you live so freaking close! We'll talk soon.

'Tac'

jayrob · Aug 16, 2008

Re: FS: *300mW MXDL Open Can Lasers With Heatsink*

Good deal man...Just let me know!

Keegan, the new FlexDrives came today! I got your build ready. Nice choice...going with the Meredith glass lens for your blu-ray!

Set at 101mA's, it's getting 115.4mW's.

This is my best guess for the power using my LPM-1 meter. I have a Coherent PowerMax 5200 digital read meter on it's way to me! It has the Coherent PM3 thermal sensor.

I will have both of my meters 'dialed in' soon enough... There is an excellent meter calibration experiment in progress:
http://www.laserpointerforums.com/forums/YaBB.pl?num=1217029972

Anyway, I am sending your laser possibly tomorrow. If I don't make it to the Post Office tomorrow, then Monday for sure. (no batteries, no warning label - as we discussed)
Jay

jayrob · Aug 30, 2008

Re: FS: *300mW MXDL Open Can Lasers With Heatsink*

Jerry M., I had some time last night and this morning. I got your awesome FlexDrive build done!

Using my Coherent PM5200 meter, it's measuring 250mW's steady. Nice!

(I put my normal white dot of paint to mark the 5' focal point)

Monday is a holiday, but the Post Office may be open today. I'm going to go down there and drop it off! As long as they are open (normally till noon on Saturday), it will be in today's mail! Let me know when you get it...
Jay

jayrob · Sep 18, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Tomius, your diode was a nice one! I re-measured the DDL driver at 416mA's. Your getting 253mW's steady through your AixiZ glass lens!

I think you will like it

...
Jay

delewareboy · Sep 25, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

how much can i buy an assembled one for?

daguin · Sep 25, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

delewareboy said:
how much can i buy an assembled one for?

Check the first page. There are several options you need to think about

Peace,
dave

jayrob · Sep 26, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

delewareboy said:
how much can i buy an assembled one for?

As Dave said, there are a few options. My personal choice for Red, is the FlexDrive driver with a Meredith acrylic lens. This combination can be fit in several different hosts. Take a look here:
http://www.sonic.net/~jayrob/MXDL/

There are blu-ray options as well!

Jay

jayrob · Sep 28, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Richard B., I got your FlexDrive/Meredith build done...

Usually at 436mA's, the power will be around 250mW's through the acrylic lens. This has been very consistent.

Yours measured at 262mW!

This is an extra 'HOT' diode! I even took it apart and re-checked the current. Lol!

I almost kept this for myself, because it's a rare diode. But since I have an unusual diode already (277mW's @ 452mA's), it's coming your way!

It will be in Monday's mail...
Jay

P.S. Use a conservative duty cycle with this monster.

jayrob · Sep 29, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Greg M., I got yours done too!

Your's is the normally expected ouput for this current. It is an excellent build, and I am sure you will like it!

Please take the time to read my included instruction sheet, and let me know when you receive it. Shipping Monday...
Jay

jayrob · Sep 30, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Robert E., your FlexDrive/Meredith acrylic build has a HOT diode too!

Shipping tomorrow. (Tuesday)
Jay

PostOfficeBuddy · Sep 30, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Hey Jay, where do you get your lens caps? I have seen IgorT even has some fluorescing GITD ones. Any info on either of these would be appreciated. Keep up the good work!

Edit: found via search.
www . laserpointerforums . com/forums/YaBB.pl?num=1194317152

Or if you're really lazy:
www . dealextreme . com/details.dx/sku.5714

Sorry about the spaces in the links, I can't posts links since I only have a few posts...

thesk8nmidget · Sep 30, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

just cut the nub off on the inside.

http://www.dealextreme.com/details.dx/sku.5714

they work great for 405nm cause they glow really bright when the caps on

PostOfficeBuddy · Sep 30, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Nice, you beat me while I was editing my own post. Have a rep.

Edit: Crap. Can't do that either...Guess I should get to postin'.

Sledge · Oct 4, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Got it!!!

OMG!!!

This is incredible!!!

Burned a whole in an old 3.5 disk in about 2 seconds!

I clearly see now why the focusable lens is better.

Thanks!! We will do business again for sure.

To anyone considering doing biz with JayRob:

This guy is top notch, order was completed quickly with lots of communication and all questions answered same day. I was blown away with his attention to detail and promptness. Too bad every one providing a service to the customer doesn't have his attitude.

Thanks JayRob!!! (RB)

PS!!! EVERYONE!!! He is not kidding when he warns you about these tools. They are not TOYS!!! You can easily blind yourself or someone else in a fraction of a second. Permanent and SERIOUS Damage will occur far faster than your blink reflex if you catch this beam in the eye even from a reflection and even diffuse scatter is dangerous!!! GET laser glasses from Wicked LAser BEFORE you start using your laser. Got mine for only 30 bucks and they arrived within a week. BE SAFE!!!

jayrob · Oct 23, 2008

Re: FS: 300mW MXDL Open Can Lasers With Heatsink

Sledge said:
Got it!!!

OMG!!!

This is incredible!!!

Burned a whole in an old 3.5 disk in about 2 seconds!

I clearly see now why the focusable lens is better.

Thanks!! We will do business again for sure.

To anyone considering doing biz with JayRob:

This guy is top notch, order was completed quickly with lots of communication and all questions answered same day. I was blown away with his attention to detail and promptness. Too bad every one providing a service to the customer doesn't have his attitude.

Thanks JayRob!!! (RB)

PS!!! EVERYONE!!! He is not kidding when he warns you about these tools. They are not TOYS!!! You can easily blind yourself or someone else in a fraction of a second. Permanent and SERIOUS Damage will occur far faster than your blink reflex if you catch this beam in the eye even from a reflection and even diffuse scatter is dangerous!!! GET laser glasses from Wicked LAser BEFORE you start using your laser. Got mine for only 30 bucks and they arrived within a week. BE SAFE!!!

Thanks for that nice testimonial Sledge!

Very glad you like the laser...

Spike, your going to like yours too! I put my customary small dot of white paint to mark the 5' focal point.

This is my first time trying the LG 20X long open can diode. As you can see from the labeled current and power reading, it is excellent!

I'll have it in today's mail for you. (Thursday)
Jay

Not FS: 300mW MXDL Open Can Lasers!

jayrob

0

Paradox3713

0

jayrob

0

jayrob

0

jayrob

0

delewareboy

0

daguin

0

jayrob

0

jayrob

0

jayrob

0

jayrob

0

PostOfficeBuddy

0

thesk8nmidget

0

PostOfficeBuddy

0

Sledge

0

jayrob

0

Online statistics

Forum statistics

Share this page