rhd
0
- Joined
- Dec 7, 2010
- Messages
- 8,475
- Points
- 0
"Brushed Metal" C3 425mW 635nm build.
They use red-coated glass lenses, and also include alternative (wider) focusing knobs to match the body style.
These are both beautiful and practical. They're small and pocket sized, but unlike a lot of "pocket sized" anythings, you're not giving up on durability in the process. They're built with the IRON 4D driver, and use thick gold-plated contact spring for the diode-side battery contact terminal. In the spirit of reducing potential points of failure, there is not a single wire used anywhere in this build. The driver fits securely on the diode leads, and the contact spring is incorporated into the driver. This setup results a "module" that is a singular part, all the way from the diode's emitter, to the driver's contact spring. It's a rock solid setup.
They run off 14500 lithium ion cells. I recommend using good IMR cells (bestinone.net has some nice ones at a decent price).
Price is $140, which includes free shipping.
You MUST own laser protection goggles appropriate for this wavelength, and
You MUST be over 20 years of age, and
You MUST be familiar and experienced with the appropriate safety precautions to take with lasers of this power.
You MUST NOT be a resident of Canada
This is not a laser pointing device. At all times, protective laser safety glasses appropriate for this wavelength must be worn by the operator. This laser should not be used around 3rd parties (non-operators) pets, or for any recreational purpose.
They use red-coated glass lenses, and also include alternative (wider) focusing knobs to match the body style.
These are both beautiful and practical. They're small and pocket sized, but unlike a lot of "pocket sized" anythings, you're not giving up on durability in the process. They're built with the IRON 4D driver, and use thick gold-plated contact spring for the diode-side battery contact terminal. In the spirit of reducing potential points of failure, there is not a single wire used anywhere in this build. The driver fits securely on the diode leads, and the contact spring is incorporated into the driver. This setup results a "module" that is a singular part, all the way from the diode's emitter, to the driver's contact spring. It's a rock solid setup.
They run off 14500 lithium ion cells. I recommend using good IMR cells (bestinone.net has some nice ones at a decent price).
Price is $140, which includes free shipping.
You MUST own laser protection goggles appropriate for this wavelength, and
You MUST be over 20 years of age, and
You MUST be familiar and experienced with the appropriate safety precautions to take with lasers of this power.
You MUST NOT be a resident of Canada
This is not a laser pointing device. At all times, protective laser safety glasses appropriate for this wavelength must be worn by the operator. This laser should not be used around 3rd parties (non-operators) pets, or for any recreational purpose.
Attachments
Last edited:
