- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
Ok guys, I need some cash so I'm throwing together a giant pile of stuff to sell, I'll probably be adding stuff over the weekend as I dig it up.
ALL ITEMS ARE GUARANTEED NON-DOA UNLESS OTHERWISE SPECIFIED
Original Coherent thermopile sensor and amp board, already modded to give 1mV per mW output, just add a PSU and DMM - reads lasers up to 10 watts - $250
Click Image to Enlarge
Universal LCD panel driver board - grab a cheap LCD panel off ebay and you've got yourself a working monitor, VGA and DVI inputs, will include user manual pdf with purchase - $75
Click Image to Enlarge
Old Pentium Laptop (around 166 mhz I think, and 64 megs of ram) works, no psu included, battery pack is dead, will include both CD ROM and floppy drives. - $25
Click Image to Enlarge
HP small form factor Pentium 4 PC, 512mb ram, 40gb HDD INCLUDES WINXP PRO LICENSE KEY - $50
Click Image to Enlarge
2W 808nm (wavelength verified) TEC cooled cmount laser diode assembly - $50
Click Image to Enlarge
CREST B/W security camera with huge zoom lens - $25
Click Image to Enlarge
Coherent 60w (yes, 60 watts) 830nm lensed diode brick, water cooled - $150 (discount available if you purchase the Acopian psu together with the diode)
Click Image to Enlarge
Uranium Glass Jar, glows bright green under 405nm, has a small chip on one side - $20
Click Image to Enlarge
Power Supplies:
All the below power supplies are very high quality supplies taken from medical laser equipment.
Power One 24v 15A, 5v 8A, 24v 4A switchmode - $40
http://dl.dropbox.com/u/1181169/CIMG1913.JPG
Power One 12v 6.8A linear, $30
http://dl.dropbox.com/u/1181169/CIMG1911.JPG
Power One 5v 2A, +/-12v 0.4A linear, $30
http://dl.dropbox.com/u/1181169/CIMG1904.JPG
Power One +/-12v 0.4A linear, $20
http://dl.dropbox.com/u/1181169/CIMG1907.JPG
Acopian 5v 150A switchmode, frame is slightly bent - works perfect $100, good for powering the 60w diode brick
http://dl.dropbox.com/u/1181169/CIMG1928.JPG
ALL ITEMS ARE GUARANTEED NON-DOA UNLESS OTHERWISE SPECIFIED
Original Coherent thermopile sensor and amp board, already modded to give 1mV per mW output, just add a PSU and DMM - reads lasers up to 10 watts - $250
Click Image to Enlarge
Universal LCD panel driver board - grab a cheap LCD panel off ebay and you've got yourself a working monitor, VGA and DVI inputs, will include user manual pdf with purchase - $75
Click Image to Enlarge
Old Pentium Laptop (around 166 mhz I think, and 64 megs of ram) works, no psu included, battery pack is dead, will include both CD ROM and floppy drives. - $25
Click Image to Enlarge
HP small form factor Pentium 4 PC, 512mb ram, 40gb HDD INCLUDES WINXP PRO LICENSE KEY - $50
Click Image to Enlarge
2W 808nm (wavelength verified) TEC cooled cmount laser diode assembly - $50
Click Image to Enlarge
CREST B/W security camera with huge zoom lens - $25
Click Image to Enlarge
Coherent 60w (yes, 60 watts) 830nm lensed diode brick, water cooled - $150 (discount available if you purchase the Acopian psu together with the diode)
Click Image to Enlarge
Uranium Glass Jar, glows bright green under 405nm, has a small chip on one side - $20
Click Image to Enlarge
Power Supplies:
All the below power supplies are very high quality supplies taken from medical laser equipment.
Power One 24v 15A, 5v 8A, 24v 4A switchmode - $40
http://dl.dropbox.com/u/1181169/CIMG1913.JPG
Power One 12v 6.8A linear, $30
http://dl.dropbox.com/u/1181169/CIMG1911.JPG
Power One 5v 2A, +/-12v 0.4A linear, $30
http://dl.dropbox.com/u/1181169/CIMG1904.JPG
Power One +/-12v 0.4A linear, $20
http://dl.dropbox.com/u/1181169/CIMG1907.JPG
Acopian 5v 150A switchmode, frame is slightly bent - works perfect $100, good for powering the 60w diode brick
http://dl.dropbox.com/u/1181169/CIMG1928.JPG
Last edited: