Lots of laser stuff FS - look here

ok im having a clear out, make me an offer in this thread do not pm me.

______________________________________________________________

1x A4 photo, framed in a glass frame and printed on glossy photo paper




click here to see the photo in high quality
www.laser-man.co.uk/test/DSCN3106.jpg

______________________________________________________________

185mw 650nm focusable red pointer with aixiz glass optics

Spec -

Size: 140mm x 14mm
Weight: 50g
Wavelength: 650nm
Laser Body: Silver Polished Brass
Transverse Mode: TEM00
Beam Divergence: 1.0mRad
Beam Diameter: -3.0mm @ aperture
Power Consumption: 300-320mA
Power supply: 2 X AAA 1.5V
Battery Lifetime: 2-3 hours
Switch: Momentary On/Off Button
Expected lifetime: >5,000 hours
Duty cycle 1 min on, 30 sec off




______________________________________________________________

160mw 650nm focusable red pointer

Spec -

Size: 140mm x 14mm
Weight: 50g
Wavelength: 650nm
Laser Body: Silver Polished Brass
Transverse Mode: TEM00
Beam Divergence: 1.0mRad
Beam Diameter: -3.0mm @ aperture
Power Consumption: 300-320mA
Power supply: 2 X AAA 1.5V
Battery Lifetime: 2-3 hours
Switch: Momentary On/Off Button
Expected lifetime: >5,000 hours
Duty cycle 1 min on, 30 sec off




______________________________________________________________

1x 5mm cubed beamsplitter, for 650nm lasers

this is used to combine two lasers together to double the power




______________________________________________________________

lots fo fans




______________________________________________________________

1x round diode housing, also acts as a heat sink. also adjustable focus





______________________________________________________________

1x square diode housing, also acts as a heat sink, adjustable focus





______________________________________________________________

4x red diode drivers, believe they are set to 200ma - never been used

http://www.laserpointerforums.com/forums/YaBB.pl?num=1206947255




______________________________________________________________

1x bag of mirrors about 1x1cm these arent front surfaced. contains about 30-50 mirrors




______________________________________________________________

1x steel housing, if anyone is interested please ask for size





______________________________________________________________

lots of aluminum block  1inch by 1inch






make me an offer!

$40.00 for the 4 red drivers will they work outputting 200mW's?phoenix77

I'll give you $140 for the scanner and the drivers.

Peace,
dave

The XY scanner is RGY, right? Is it portable or plugged into the wall?
I'd be willing to put up a nice amount for it.
I WANT IT!!!!!
only if it has instructions
It looks really pretty!!!
How many mWs?
It might be a bit rough, but it still looks nice. I'd say it'd be worth more than $140

phoenix77 said:

$40.00  for the 4 red drivers will they work outputting 200mW's?phoenix77

Click to expand...

a little bit more info

2 MD100 100mA Micro-Drive
2 MD200 200ma Micro-Drive

this was on the invoice from ryan

daguin said:

I'll give you $140 for the scanner and the drivers.

Peace,
dave

Click to expand...

not accepted

the scanner alone cost me £150 to make - without a laser

potatorage said:

The XY scanner is RGY, right? Is it portable or plugged into the wall?
I'd be willing to put up a nice amount for it.
I WANT IT!!!!!
only if it has instructions
It looks really pretty!!!
How many mWs?
It might be a bit rough, but it still looks nice. I'd say it'd be worth more than $140

Click to expand...

as stated the scanner does not come with a laser.

it operates on 5v

there are no instructions, to program you need to know codeing

Man - I WISH I could afford the scanner ! I'd rather have one of YOURS than a store bought one any day ! {no, that is not considered sucking up since I have no chance of coming up with $300+ spare bucks ATM !}

How hard would it be to stick lasers in?

andy_con said:

[quote author=daguin link=1213454836/0#2 date=1213456940]I'll give you $140 for the scanner and the drivers.

Peace,
dave

Click to expand...

not accepted

the scanner alone cost me £150 to make - without a laser[/quote]


What's the bit rate on it?

I just picked up a ScanPro 20K with a DMX board for $150.

The drivers are the old style Rkcstr drivers ($6 apiece);
http://www.laserpointerforums.com/forums/YaBB.pl?num=1206947255/0

Peace,
dave

Hows $30.00 sound since only 2 are 200 ma .If you'll take $30.00 for all 4, then sold bro!! PM me with DETAILS on PAYMENT phoenix77/rob

potatorage said:

How hard would it be to stick lasers in?

Click to expand...

depends on the laser?

daguin said:

[quote author=andy_con link=1213454836/0#5 date=1213457990][quote author=daguin link=1213454836/0#2 date=1213456940]I'll give you $140 for the scanner and the drivers.

Peace,
dave

Click to expand...

not accepted

the scanner alone cost me £150 to make - without a laser[/quote]


What's the bit rate on it?

I just picked up a ScanPro 20K with a DMX board for $150.

The drivers are the old style Rkcstr drivers ($6 apiece);
http://www.laserpointerforums.com/forums/YaBB.pl?num=1206947255/0

Peace,
dave[/quote]

manaul for the controller
manual for the controller

http://www.parallax.com/Portals/0/Downloads/docs/prod/oem/OEM-BS2-A2.zip

this is no fancy scanner, it does something like 2k if that LOL.

it cost me £150 to make, that does not mean i want that for it.

yes the drivers are the old style ones

andy_con said:

not accepted

the scanner alone cost me £150 to make - without a laser

What's the bit rate on it?

I just picked up a ScanPro 20K with a DMX board for $150.

The drivers are the old style Rkcstr drivers ($6 apiece);
http://www.laserpointerforums.com/forums/YaBB.pl?num=1206947255/0

Peace,
dave

manaul for the controller
manual for the controller

http://www.parallax.com/Portals/0/Downloads/docs/prod/oem/OEM-BS2-A2.zip

this is no fancy scanner, it does something like 2k if that LOL.

it cost me £150 to make, that does not mean i want that for it.

yes the drivers are the old style ones

Click to expand...

Dude, I hope you get everything you want out of life. However, we deal in a changing marketplace. I have an $84K mobile home that I can't unload at $50K right now. You can get a 200mW red handheld laser from DX for $56 now.

It's a 2K scanner without a laser. Since you "know" you don't want $150 for them AND you "know" that you're not going to get $300 for them, how much do you want for them?

Peace,
dave

WTF!!!! less of the shittyness please.....

i would take £90 for it

Well, are the dicros/etc aligned? and it would be maybe, the DX 35 green labby and the 70 red labby