- Joined
- Dec 1, 2008
- Messages
- 878
- Points
- 28
So I tried to sell these awhile ago but could only accept cash but now I'm back for TRADES!
I am working on building another scanner now (RGB) but I need parts. I am open to most any trade, as long as its scanner parts
Im looking for RED, GREEN, or BLUE modules. Also a case, DAC(fb3 only), or other parts.
If you are interested in any of these projectors DROP ME A PM :wave:
---------------------------------------
I am working on building another scanner now (RGB) but I need parts. I am open to most any trade, as long as its scanner parts
Im looking for RED, GREEN, or BLUE modules. Also a case, DAC(fb3 only), or other parts.
If you are interested in any of these projectors DROP ME A PM :wave:
---------------------------------------
Up first is my favorite, Its a BLUE 488nm 250mw (rated) ~35mw actual (complete guess) Argon laser scanner system 12k ILDA, DMX, Auto modes . Ready to go out of the box.
Its a Uniphase 2202-35LL, LL is the optics designator and means a custom part in this case FYI.
This laser starts perfect every time.
This laser has no AOM or shutter so it is constantly on (no blanking)
Here is the ILDA test pattern at 12k-remember this is only 12k + a soundcard dac running it so you could easily get better results-<-CLICK
This argon has a broken photocell so when it starts is jumps to ~full power(8A) and stays there (not that this was a problem for me :eg: )
This scanner comes with everything in this picture, including a LARGE pelican case to keep everything safe.
---------------------------------------------------
Up next is my RGVP scanner. This has 2x 650nm 80mw modules, a 50mw 532nm module, and a PHR running at ~100ma.
The green module has a bad lens and loose wire somewhere. You should expect to have to fix the green module soon if you buy this.
The "P" in RGVP was supposed to be pink but the BR and RED beams dont actually mix, they just both come out of the same aperture.
The BR diodes driver is powered off of 1 or 2 9v batteries that attach to the rear of the laser.
-----------------------------------------------------
Lastly. my ?300mw? RGY. I don't have a power meter but this one was advertised as 200mw 650nm + 100mw 532nm 10k.<-I doubt the 650 is running at 200mw.
When I got this I quickly realized that the colors were way off so I had to turn down the green to get it to match and get a good golden yellow color(not seen in videos). The sound mode on this unit sucks(to me) but it has some cool DMX patterns. NO ILDA but comes with a case. The laser has a burn on the top from an incense stick and is missing the front black aperture piece.
YouTube messed up the framerates on these, Sry.
-------------------------------------------------
Thats all the laser related Stuff im trying to trade, but I have some other great stuff yall may be interested in as well.I have some LEDfx and DMX gear.
Chauvet LED-BAR (2x) - COLORbar
LightJockey 2- MARTIN LIGHTJOCKEY UNIVERSAL USB/DMX - Thomann Cyberstore Español
Chauvet COLORmist kit- Chauvet COLOR-MIST Rgb LED Panel System*-* LED Lighting Packages*-* LED Lighting*-* Lighting*-* PSSL.com
Martin Freekie DMX controller (2x)- Martin Freekie DMX Lighting Controller - Lighting Controllers - DJ Equipment & Effect Lighting: Soundmasters Direct
"Chauvet dmx board "- CHAUVET DMX-44 DMX CONTROLLER
LSC black DMX Board- same style as the Chauvet but nicer.
Elation DMX Dimmer 2x4CH- Amazon.com: Elation 4-Channel DMX Hybrid Dimming or Relay Pack, 600 Watts Max per Channel: Musical Instruments
American DJ PAR 64 LED- American DJ PAR-64 LED Par Can Fixture*-* LED Stage Color Changers & Color Wash*-* LED Lighting*-* Lighting*-* PSSL.com
Last edited: