Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Up for sale now is my pair of Kryton lava modules. These were a limited run specifically done for Dr. Lava. Both of the modules come with a diode pressed into each and are fully functional lasers. The red open can is capable of 350mw if you really want to push it and has an aixiz glass modules. The bluray is a 803T and capable of up to 200 if the diode is right and you wanna push it to death...
Both of these were designed specifically for incorporation into a laser scanner or spyrograph setup. I had every intention of putting these in a 3 motor spyrograph with a 50mw green module.
We all know the Kryton head is a superior host with maximum heatsinking. With the Kryton head, the Lava Kryton is great at heatsinking, add to that additional fins on the back of the module adds additional heatsinking. There's a hole on the back side of the module for wiring to exit the back side of the module and a flat spot for screwing onto the bracket. This is not designed to have a driver inside it at all. ONly externally. As such, I'll include 4 groove driver kits that can be utilized for this purpose with the set.
THESE ARE RARE!! ONLY 50 WERE MADE TOTAL.
Asking price is $300 for the pair, or $150 for each. This is a limited time offer. If I don't get any significant offers I will pull this and offer them up on ebay for twice the price and since they are truly for incorporation into scanners or spyrographs have no need to fear ebay pulling my auction.
The pictured bracket has been cut in half as it was impossible to combine the beams with optics side by side in the space I had available.
Both of these were designed specifically for incorporation into a laser scanner or spyrograph setup. I had every intention of putting these in a 3 motor spyrograph with a 50mw green module.
We all know the Kryton head is a superior host with maximum heatsinking. With the Kryton head, the Lava Kryton is great at heatsinking, add to that additional fins on the back of the module adds additional heatsinking. There's a hole on the back side of the module for wiring to exit the back side of the module and a flat spot for screwing onto the bracket. This is not designed to have a driver inside it at all. ONly externally. As such, I'll include 4 groove driver kits that can be utilized for this purpose with the set.
THESE ARE RARE!! ONLY 50 WERE MADE TOTAL.
Asking price is $300 for the pair, or $150 for each. This is a limited time offer. If I don't get any significant offers I will pull this and offer them up on ebay for twice the price and since they are truly for incorporation into scanners or spyrographs have no need to fear ebay pulling my auction.
The pictured bracket has been cut in half as it was impossible to combine the beams with optics side by side in the space I had available.
