Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Krytons Bare!  Closed.

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
For those of you that know about the Kryton laser barrels, know that they are $55 for clear anodized and $60 for black.  However, I've got a limited time offer here.  The emergency run is done and left me with more than I need (primarily because I mistakenly believed that folks actually wanted more of these)  As such, I'm stuck with barrels that I can't pay for and need to move quickly.  So here's the deal.

If you provide all the bobs and bits.  IE lens, clicky, tailcap, o-rings, inserts and such, and don't mind a Bare aluminum barrel (NOT POLISHED) I will sell these at just slightly above my cost for them.  This means $45 per.  This does not include shipping which will be charged on a individual basis so that folks can actually pay real shipping charges not some elevated cost.  Will work out to about $4 per. unless you want an upgrade to priority.

These will be just the laser barrel and o-ring for the clicky spacer as well as a driver.  no fancy frills or anything.  This will only be for 1 week and then they go on ebay.

DSC00369.jpg

DSC00368.jpg

DSC00366.jpg

DSC00039-1.jpg

PIC_0068.jpg

PIC_0069.jpg

DSC00323.jpg

DSC00327.jpg

DSC00321.jpg


Update with pictures of polished vs. non-polished.  I can get it more mirrored like.

DSC00366-1.jpg

DSC00365-1.jpg


Here is where you can get the additional components that I won't be providing.

Clicky
http://dealextreme.com/details.dx/sku.5632

o-rings to prevent thread seizing
http://dealextreme.com/details.dx/sku.5680

tailcaps
http://www.dealextreme.com/details.dx/sku.5498

You can get inserts at your local bead shop.
2mm black rubber inserts solid core
http://shop.ebay.com/?_from=R40&_trksid=m38&_nkw=2mm+rubber&_sacat=See-All-Categories

Lens
http://www.aixiz.com/shop/product_info.php?products_id=86
glass lens
http://www.aixiz.com/shop/product_info.php?products_id=34
 





Joined
Aug 10, 2008
Messages
268
Points
18
Re: FS for those with limited $$$.  Krytons Bare!

PM sent for polished Kryton
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

Got it.  I've gotten these today and they are not polished, so I'm going to take the time to utilize my new buffer, polisher, and put a high gloss shine on A FEW of these. it's very time consuming to do all these. If you want it polished it's an additional $5 per.

now, I'd like everyone to know taht I'm barely making any profit on these at all since this was such a small run, the cost went up a lot.  Had there been 100+ the cost would be a little lower.  so this is a once in a lifetime opportunity.  I can't raise the funds to pay for these until they are all sold.
 
Joined
Aug 26, 2008
Messages
387
Points
18
Re: FS for those with limited $$$.  Krytons Bare!

PM Sent...

Also, will the head be tapped for the lens screw threads?
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

The heads will be tapped for the lenses.
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

Here is some more pictures of the mirrored polish I can put on these. I've been workin at learning how to accomplish this and it's been fun. Mothers polish works WONDERS.

DSC00366-2.jpg

DSC00365-2.jpg

DSC00364-2.jpg

DSC00363-2.jpg

DSC00362-2.jpg
 
Joined
Feb 29, 2008
Messages
2,344
Points
0
Re: FS for those with limited $$$.  Krytons Bare!

Will the head be bevelled properly?
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

robjdixon said:
Will the head be bevelled properly?


Good question, I will bevel it for you specifically.
 
Joined
Feb 29, 2008
Messages
2,344
Points
0
Re: FS for those with limited $$$.  Krytons Bare!

I might be buying one, then. Can I pay a couple $ extra for a retaining ring?
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

Yeah. a retaining ring is $1.50 more. Paypal to kenkassidy@hotmail.com Make sure to note all the addons and what it is your getting in the notes.
 
Joined
Oct 20, 2007
Messages
128
Points
0
Re: FS for those with limited $$$.  Krytons Bare!

Sorry Kenom, I must of missed the part about a "retaining ring". What is it's purpose? Is it for the postive end of the battery compartment?
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

The retaining ring holds in the clicky so that it doesn't pop out. it's just a 11/16" snap ring.
 

Attachments

  • DSC00367.JPG
    DSC00367.JPG
    25.1 KB · Views: 83
Joined
Oct 20, 2007
Messages
128
Points
0
Re: FS for those with limited $$$.  Krytons Bare!

Ok thanks, I should have a few of those laying around....
 

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
Re: FS for those with limited $$$.  Krytons Bare!

if not you can buy them online in a million different places for really cheap.
 




Top