Up for sale is pretty much everything I own laser related and a few non-laser related to keep me from being homeless.

First off I apologize to steve for selling things that were given to me free. However given my emergency, I hope that he won't mind. If you do, well, I apologize but my need is greater than my need for lasers.

so. Here's the lineup.

#1 Kryton prototype red laser. This one kills me to give up. I paid $900 to have it made when we were first considering the Krytons and is the very first diode pocket host that was ever made. It has a LOC that was set to 350mw but has degraded down to a 270mw over the last year. Flexdrive in this baby with a single 17670 battery (included) Asking $300 for this one. Own a piece of laser history!
You can see it compared to a Kryton smooth, and a Kryton groove



#2 beam combiner pulled from a laser copier. This is designed to combine 2 different IR lasers into one beam and comes with all the optics and diode mounts to accomplish it. I'm asking $45 for this. would make a great combiner for 2 red LOC diodes to make 300mw-500mw.



#3 HeNe tube. outputting 2-3mw 632nm. I've never powered it up as I don't have a psu. I was going to get one. Asking $20

This is just the beginning folks. I've got more just need to package them together in bundles as they aren't valuable by themselves.

adding 7 plastic enclosures. These were slated for the Kenometer USB but turned out to be too small with the added filter circuit to it. I spent $2 a pop on these and they are INCREDIBLY SMALL. Asking $2 plus whatever it costs to ship to your neck of the woods. (dimensions 2.283" 1.378" 0.630") (2 to robjdixon)


7 miniature dual 5k potentiometers $1.50 each (shipping extra and each one comes with a knob) (3 to don't_laze_me_bro)


11 rocker switches.15A @125V $1 each (shipping extra you might detect a pattern)


8 switching power supplies. 5.1V, 2A and +-12V, 200mA ARTESYN POWER SUPPLY-MPJA, Inc. Asking price $5 each (shipping extra)

Dymo labelwriter 400 Turbo postage and label printers. Asking $75 each. (need I say shipping is extra?)

Jayrob mini host $5


Aixiz labby (broken) driver works
selling as parts (modules) and driver $25

Laserone spirograph. $20 has a dead diode in it I believe.


Lasersaber this one really needs no explanation, but will do so anyway. It's a clear polycarbonate blade with a ball bearing in the center, that rocks up and down allowing the beam of a laser to go into the blade or not. I have a review of this particular unit. Asking $25 shipping is extra on this one.
http://www.metacafe.com/watch/167237...rsaber_review/

Free bump!

Good luck selling these, I'm sure they will go quick, very nice deals..

I'd love to buy some but I just bought a new rayfoss and an iPad... darn!

I'll take #7 and #10 is there any way to get a picture of these items, esp #7

did you get my Pm ??

I have. I've pm'd you back. Pyro, he did pm me prior to your offer, so I'm going to see if we can work out a trade or whatever and if not, then this is yours.

I was going to get my RPL fixed BUT Id rather help you ken, I have close to $100 and Im going to see if I can gather enough to take that titan off your hands, let me see real quick OK?

PM Sent....

Jerry

don't go putting yourself in my position over it. I appreciate the help.
Ken

I wont Ken, But I have always like them, plus i dont have a high power green. I have plenty of 405nm's Im trying to sell one of mine... How bad is the divergance on that titan? And are there mode hopping issues?

I don't think it should matter wheather it's a PM or right here in the thread just look at the time stamp on both and pick the earlyest one, heck if we are talking just PM's I was asking you about this stuff 20 min befor you posted it rember you said you were going to put it up in about 20 min.

Please just look at the time stamps and see who was first.....

I honestly think that the issue with the divergence is as a result of modehopping just a little. The beam when seen through a lens (to make it bigger) does seem to shift a little bit. This has a nice tight beam up close, but it gets to about 3' at 100 yards. Not very encouraging I know huh?! LOL

yeah his PM was literally 26 seconds (based on the timestamp) before your posting in this thread indicating interest in #7.
Crazy guy has offered me both of the Kenometer Lites I built for him (value $150 each) in trade for the spiro.. Honestly, I think he's nuts...LOL
Either that or incredibly generous

That is not too bad Ken, I am not allowd to sell that 405 to buy this from you though SORRY!

I will be telling people of this sale though! Hope your back on your feet soon!

flamingpyro, he did not however express an interest in the pelican case.

Nice deals. Good luck selling.

I'm interested in the Kryton Groove host. What color is it? Has it ever been used? Does it come with a lens, glass or plastic?

-Tony

Ill take #3 and #4 if xplorer877 doesn't take #3

It will come with a plain plastic aixiz lens. It has been assembled once I believe. It is unanodized silver with no polish.

Good luck with the sale. I look forward to other items...

M

... Bump...

Ji Ken,

I just had a thought. What are the chances of you selling your Kenometer in a non-assembled kit form? I don't know if that would be practical regards calibration or difficulty factor but it may help move those items if you had them? I'd sure relish the challenge of a build-your-own LPM. I have a LaserBee I I could match it to.

Trying to help...

M

Nice stuff. Hope it all turns out alright for you bro. Hang in there.

pelican case???? pm sent

Where did you get the "big scary laser do not look into it with your remaining eye" sticker?

The value of the Kenometer is not really in its assembled form, but rather the thermopile unit it's built with. The thermopiles are already calibrated to 1mW to 1mV or something, and just get attached to a power supply and an ADC LCD, with a small zeroing circuit if it's better than a Lite variety. It's not really going to drop the price much for an unassembled version, unless you're talking about the difference between the Pro and Regular models. If he's selling these power meters, assembled or not, he should be keeping them at (at least) the $300 or so mark because you're getting a Coherent thermopile built into the meter, which--alone--usually costs at least $300 on eBay.

I was lucky enough to get in on the Kenometer Lite deal at an insanely low price of $150, and requested an unassembled one because I'll be using it for parts, not as is. I haven't received the parts yet, but I don't need it right away and others should get theirs first.

The original Kenometers with the eBay surplus Heads were from
Coherent and have an output of 1uV/1mW and an active area of
19mm dia.
The Kenometer Pro... USB and Lite models all use the same Head
from another Manufacturer (which I found about a month ago..
but will not disclose here until Kenom OKs it) and have an output
of 1mV/1mW and an active area of 12mm dia.

Jerry

Correct. These heads are almost as good as the older coherents I was packaging in my older meters.