Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

jayrob Build Kits, Lenses, and Other Stuff Listed Here!

Joined
Nov 4, 2014
Messages
1,146
Points
63
Hey Jaydob,
Can you powder coat of paint the magmlight hosts? If so what will that cost? I'm looking for either white or very pale baby blue for a build I'm doing.
 





jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hey Jaydob,
Can you powder coat of paint the magmlight hosts? If so what will that cost? I'm looking for either white or very pale baby blue for a build I'm doing.

Sorry I never got into powder coating...

Open a thread to ask about it in the 'Experiments and Modifications' forum and I'm sure there are some here that are experienced at powder coat...
 

Geddye

0
Joined
Nov 13, 2015
Messages
1
Points
0
I'm a new guy here. I'm interested in purchasing the Phaser host kit. can you send me pricing and info on that please?
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
I'm a new guy here. I'm interested in purchasing the Phaser host kit. can you send me pricing and info on that please?

Sure I'll send a PM with the whole spiel and eye protection information too...
 
Joined
Dec 3, 2015
Messages
4
Points
0
Yes...

Send me a PM! :beer:


Hi there! I am quite new to powerful lasers, and although I've owned a few 10mw s in the past, I don't have much real experience in DIY lasers. I have decided to try and build Styropro's 160mw pen laser build, and I was told to come here and buy the chrome leadlight pen host off of you. Firstly, I would like to request some pricing info if you are still selling this host, and secondly, I was just hoping for some advice on the components for styropro's build. I am planning to order the Osram PL450B diode in copper module from DTR's laser shop, and I was wondering if you could recommend a suitable driver - as I can't seem to find the Microboost Drive online... Also, he did mention that he changed the current to 280mA - so it would have to be pot changeable. Also, what is the switchboard, and does your pen host come with one?
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hi there! I am quite new to powerful lasers, and although I've owned a few 10mw s in the past, I don't have much real experience in DIY lasers. I have decided to try and build Styropro's 160mw pen laser build, and I was told to come here and buy the chrome leadlight pen host off of you. Firstly, I would like to request some pricing info if you are still selling this host, and secondly, I was just hoping for some advice on the components for styropro's build. I am planning to order the Osram PL450B diode in copper module from DTR's laser shop, and I was wondering if you could recommend a suitable driver - as I can't seem to find the Microboost Drive online... Also, he did mention that he changed the current to 280mA - so it would have to be pot changeable. Also, what is the switchboard, and does your pen host come with one?

Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)
 
Joined
Dec 3, 2015
Messages
4
Points
0
Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)

Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser
 
Joined
Dec 3, 2015
Messages
4
Points
0
Sorry I don't sell the pens any longer but you can possibly get one from here: Creative Technology Lasers - Your source for diode lasers and laser modules at green, red and other wavelengths. (he was the supplier I got the pens from)

He also has the switch board shown in this thread which has good information for building:
http://laserpointerforums.com/f64/fs-new-pen-host-kits-switch-board-spring-option-nice-22561.html

DTR has options for driver included in his modules for an easy build. Just need a host for the module... (just need to know from DTR what battery supply is needed for which ever driver/diode combination you get)

Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser in to? Like, do you have any new pen hosts available for sale?
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hi again! Thanks for your reply, I think I've instantly learnt a lot more about the module housing. I was just wondering if you stocked any new hosts that I could put the parts of this laser

My stuff is listed on the first page of this thread...

Just send me a PM! :beer:

Don't forget the safety glasses...
 

BobMc

0
Joined
Apr 23, 2016
Messages
3,685
Points
113
Hello, my name is BobMc and I'm new to this forum. Would like to talk to you about your pocket mini kit. This would be my first built so I would want a hot kit . Seeing how I never built a laser before and have chubby fingers was hopeing you could complete all you can and than instruct me on the rest?was looking at a 445 with a black host. Thanks for your time😊
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hello, my name is BobMc and I'm new to this forum. Would like to talk to you about your pocket mini kit. This would be my first built so I would want a hot kit . Seeing how I never built a laser before and have chubby fingers was hopeing you could complete all you can and than instruct me on the rest?was looking at a 445 with a black host. Thanks for your time😊

Hi BobMc,

Welcome to LPF! :beer:

Let me recommend an easier assembly kit:
http://laserpointerforums.com/f64/fs-18650-build-kit-easy-assembly-445nm-blu-ray-red-43857.html

Send me a PM and I can point you in the direction of the diode/module to get, and remind you of proper eye protection...
 
Joined
Jun 11, 2016
Messages
1
Points
0
I have a 6W NUBM44 450nm Laser Diode In Copper Module W/Leads & G-2 Glass Lens, 4.5A Super X-Drive Laser Driver, and a blue 2 cell mag light. I wold like to order an aluminum heat sink( fancy one) from you. What type of payments do you take?
BTW, im trying to build a 6w laser
 
Last edited:

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
I have a 6W NUBM44 450nm Laser Diode In Copper Module W/Leads & G-2 Glass Lens, 4.5A Super X-Drive Laser Driver, and a blue 2 cell mag light. I wold like to order an aluminum heat sink( fancy one) from you. What type of payments do you take?
BTW, im trying to build a 6w laser

I'll send you a PM... :beer:
 
Joined
Jul 31, 2016
Messages
6
Points
3
Hello jayrob, i am building a 6W laser atm diode etc bought from DTR site:
NUBM44 450nm Laser Diode
In 12mm Copper Module
W/SXD Driver &
G-2 Lens
I will most likely be putting it into the RL-2088 and heard you make the heatsinks for that model? also i am open to other suggestions if you have a better host in mind to fit it into?
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Hello jayrob, i am building a 6W laser atm diode etc bought from DTR site:
NUBM44 450nm Laser Diode
In 12mm Copper Module
W/SXD Driver &
G-2 Lens
I will most likely be putting it into the RL-2088 and heard you make the heatsinks for that model? also i am open to other suggestions if you have a better host in mind to fit it into?

At that power large battery/large heatsink is recommended...

Take a look at my Mag kit. There are many options with the kit depending on whether you want a single battery vs a 2 cell build but if you already have the driver (guessing you have an SXD buck driver), then you will need a 2 cell build.

See here:
http://laserpointerforums.com/f64/f...exmodp3-side-button-forward-clicky-57278.html

Send me a PM! :beer:
 




Top