LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Heatsink - closed
- Thread starter LikeitBright
- Start date
Re: Heatsinks - machined to your specs. Optional h
Received the host and heatsink today, very nice thank you. Too bad the host (ultrafire C3 SS) wasn't as professionally done as your heatsink
I have one here and they both have quirks maybe between the two I'll have the perfect one. Thanks again, the whole process was much faster than I expected.
Received the host and heatsink today, very nice thank you. Too bad the host (ultrafire C3 SS) wasn't as professionally done as your heatsink
I have one here and they both have quirks maybe between the two I'll have the perfect one. Thanks again, the whole process was much faster than I expected.- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
Oh cool. Yeah the hosts are relatively inexpensive so you can always chop and change parts until your happy with the final package.20vturbo said:Received the host and heatsink today, very nice thank you. Too bad the host (ultrafire C3 SS) wasn't as professionally done as your heatsink
jnrpop
0
- Joined
- Dec 7, 2008
- Messages
- 723
- Points
- 63
Re: Heatsinks - machined to your specs. Optional h
Thanks Likeitbright, my heatsinks arrived and i must say awesome product
Will look forward to doing business again for sure...
Thanks ;D
Thanks Likeitbright, my heatsinks arrived and i must say awesome product
Will look forward to doing business again for sure...
Thanks ;D
Re: Heatsinks - machined to your specs. Optional h
How are you with precise drill angles?
I take it you route? CNC or manual?
Materials... do you do CuW-alloy?
Can you do diode press fittings?
How about soft electroplating?
Seriously, though, I've got a love for this flashlight, and you mentioned mad skillz...
Any estimate on a TO-3 cage based on its head? Flat base? Lens thread?
How are you with precise drill angles?
I take it you route? CNC or manual?
Materials... do you do CuW-alloy?
Can you do diode press fittings?
How about soft electroplating?
Seriously, though, I've got a love for this flashlight, and you mentioned mad skillz...
Any estimate on a TO-3 cage based on its head? Flat base? Lens thread?
Attachments
- Joined
- Feb 22, 2008
- Messages
- 3,182
- Points
- 48
Re: Heatsinks - machined to your specs. Optional h
you might as well go ahead and make a few, RPL users are everywhere
jayrob said:Eye candy dude! Nice work.
If I sent you an RPL cap, would you be able to duplicate a cap that has the same threads, but will house a clicky switch, similar to Kenom's Kryton tail switch set up?
Jay
you might as well go ahead and make a few, RPL users are everywhere
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
Oh no, this is just a spare time hobby - I don't do anything excessively complex.
Oh no, this is just a spare time hobby - I don't do anything excessively complex.
- Joined
- Apr 29, 2007
- Messages
- 1,076
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
What kind of precision do you go to?
What kind of precision do you go to?
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
To around 0.01mm. Really depends on the nature of the part though. I only do this in my spare time, I'm not a machine shop in a professional sense.
To around 0.01mm. Really depends on the nature of the part though. I only do this in my spare time, I'm not a machine shop in a professional sense.
- Joined
- Mar 25, 2008
- Messages
- 215
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
Would it be possible to do a heatsink as shown below, and what would the cost of that be? I'm just checking, I probably can't afford anything at the moment :'(
By the way, I didn't find my caliper so I couldn't do exact measurements, so I just used a normal ruler but the measurements should be fairly accurate. And the 12mm hole is for the Aixiz module, and you probably have a better measurement of the diameter than I have.
Would it be possible to do a heatsink as shown below, and what would the cost of that be? I'm just checking, I probably can't afford anything at the moment :'(
By the way, I didn't find my caliper so I couldn't do exact measurements, so I just used a normal ruler but the measurements should be fairly accurate. And the 12mm hole is for the Aixiz module, and you probably have a better measurement of the diameter than I have.
Attachments
Re: Heatsinks - machined to your specs. Optional h
Cool.
I will PM you some drawings once my paycheck is in; should be in a few days.
I'm fine with doing assembly and such on my end, so I'll try to keep the machining simple to minimize the hassle.
LikeitBright said:
Cool.
I will PM you some drawings once my paycheck is in; should be in a few days.
I'm fine with doing assembly and such on my end, so I'll try to keep the machining simple to minimize the hassle.
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
Something like $15-$20 each shipped depending on quantity.Snytbaggen said:
- Joined
- Apr 2, 2009
- Messages
- 98
- Points
- 0
Re: Heatsinks - machined to your specs. Optional h
Cool.
I will PM you some drawings once my paycheck is in; should be in a few days.
I'm fine with doing assembly and such on my end, so I'll try to keep the machining simple to minimize the hassle.
[/quote]
Sounds good.
suiraM said:
Cool.
I will PM you some drawings once my paycheck is in; should be in a few days.
I'm fine with doing assembly and such on my end, so I'll try to keep the machining simple to minimize the hassle.
[/quote]
Sounds good.
