Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Two Custom Clicky Hosts 1x18650 or 2x18350 PRICE LOWERED!

Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
SOLDUp for sale is a custom rear switch hosts and hold a full size 12x30mm module. This host hold 1x18650 battery or 2x18350 batteries. Host is 6 inches long and 1 inch diameter. The Host is prewired and has a positive contact inside. If you have a prebuilt DTR module you can build this laser in about 10 minutes.

SOLD48.00 for the host with the copper color rings.
Free shipping unless you live outside of the U.S. PLEASE PM ME.

CFD58EB6-0A2A-40E8-B843-7A186880CBCC_zps16nd8jlw.jpg

F163619A-6E89-4863-9A39-8F5E2B7EFF66_zpsgo33xfnp.jpg
CC580A5A-2BF2-43D9-8304-FAB15AC98692_zpsr5m5mc3a.jpg

D0ACB46B-68B7-4EAC-90A4-C454717FD307_zps65xgst6w.jpg
 
Last edited:





crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

well darn, I almost wish I would have waited. Those are incredible!
 
Last edited:
SilverFire

SilverFire

0
Joined
Aug 23, 2014
Messages
486
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

attachment.php
 

Attachments

  • +rep laser hosts.jpg
    +rep laser hosts.jpg
    129.3 KB · Views: 455
Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Thanks! ^^^^
 
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Ehgemus, would it be possible to:
- Take this style/look
- Make it a side clicky
- Make it a 2x18650 host
- Drill 3x 12mm holes in the heatsink (on a triangle pattern), instead of one

If possible, then I just need to turn my mind to a 3 channel buck driver capable of ~7.5 total amps of output. :)

EDIT: Too clarify, not looking to combine beams, just to output three roughly parallel ones.
 
Last edited:
Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

rhd said:
Ehgemus, would it be possible to:
- Take this style/look
- Make it a side clicky
- Make it a 2x18650 host
- Drill 3x 12mm holes in the heatsink (on a triangle pattern), instead of one

If possible, then I just need to turn my mind to a 3 channel buck driver capable of ~7.5 total amps of output. :)

EDIT: Too clarify, not looking to combine beams, just to output three roughly parallel ones.
Click to expand...

Yes I can do that but we would need to find a switch that can handle the current if it's going to be over 7A
Any ideas on a switch?
 
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Ehgemus said:
Yes I can do that but we would need to find a switch that can handle the current if it's going to be over 7A
Any ideas on a switch?
Click to expand...

Could just cheat if it's close. I'll be bucking voltage, so the current on the input side would be more like 5A. So a switch rated for even half that would probably be fine. What are your existing switches rated for?
 
crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

rhd said:
Could just cheat if it's close. I'll be bucking voltage, so the current on the input side would be more like 5A. So a switch rated for even half that would probably be fine. What are your existing switches rated for?
Click to expand...

The typical "angel eye" switch is rated for 3A. If you want a latching switch though, make sure you have the room in your host, they are a fair bit longer than the momentary versions.
 
Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

rhd said:
Could just cheat if it's close. I'll be bucking voltage, so the current on the input side would be more like 5A. So a switch rated for even half that would probably be fine. What are your existing switches rated for?
Click to expand...

They are rated at 3A. I thank it would probably be ok.


crazyspaz said:
The typical "angel eye" switch is rated for 3A. If you want a latching switch though, make sure you have the room in your host, they are a fair bit longer than the momentary versions.
Click to expand...

latching switches are about 10 mm longer
 
Last edited:
crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Ehgemus said:
They are rated at 3A. I thank it would probably be ok.




latching switches are about 10 mm longer
Click to expand...

And surprisingly difficult to find in 12mm diameter. Took me forever to find one.
 
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Ehgemus said:
They are rated at 3A. I thank it would probably be ok.

latching switches are about 10 mm longer
Click to expand...

3A would be just fine.

I mean, if we're getting picky about running 5A through a mechanical switch that's only rated for 3A, then we should probably have a conversation about the currents we're running our incredibly sensitive (screw that.... magical) InGaN diode wafers at ;)
 
Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
Re: FS: Two Custom Clicky Hosts 1x18650 or 2x18350

Yeah I thank we will be fine. I would be more worried about using a latching switch than I would a momentary.
 
crazyspaz

crazyspaz

0
Joined
Jul 4, 2012
Messages
2,834
Points
63
The one with more black on it- is there a driver "pill" or is is just all one piece like the others ive gotten from you?
 
Ehgemus

Ehgemus

0
Joined
Feb 28, 2009
Messages
1,384
Points
0
crazyspaz said:
The one with more black on it- is there a driver "pill" or is is just all one piece like the others ive gotten from you?
Click to expand...

Yes it is a module build host, seams to be what everyone is wanting nowadays. Quick and easy.
If you want something with a driver pill type of host just pm me. I can build whatever you want.:)
 
Last edited:
Jstr

Jstr

0
Joined
Feb 10, 2014
Messages
347
Points
0
Ehgemus said:
Yes it is a module build host, seams to be what everyone is wanting nowadays. Quick and easy.
If you want something with a driver pill type of host just pm me. I can build whatever you want.:)
Click to expand...

Really? I honestly prefer the driver pill hosts, but I guess that's why I haven't seen many of those. Also those without a pill are probably easier to machine. Now I know :)
 
You must log in or register to reply here.




Top