jnrpop
0
- Joined
- Dec 7, 2008
- Messages
- 723
- Points
- 63
Hi guys,
For sale is this custom laser.
Cost: Sold USD
Shipping: FREE, tracked international from Germany.
Paypal only
Parts included in sale:
-New NUB05 455nm 3.5W diode,
-Custom 21mm round aluminium heatsink with driver shelf,
-Cylindrical lens correction set coated for 445nm-465nm (3pcs)
-Custom 25mm aluminium host body, takes (1x18650 or 2x 16340)
-Custom 25mm cylindrical correction optics adapter to suit host
Selling this laser as not-complete or to finish as a project, required:
#1 - Install a driver for the NUB05 Diode (2.5-4A)
#2 - Install a Tailcap Switch 22mm Diameter
#3 - Finish Cylindrical lens setup, the 3 Lenses need to be aligned and "set/glued" in the custom lens adapter section provided)
________
INFO:
Laser host/body
Aluminium, silver matt finish
Measures: 15.5cm x 2.5cm
Takes 1x 18650 or 2x 16340 cells
Inside is a new NUB05 455nm 3.5W Diode with Gball lens (Tested working on Benchtop P/S). Its mounted in a custom 21mm Aluminium heatsink also using thermal paste, and the custom heatsink also has a driver shelf measuring 20x20mm, to heatsink a driver of your choice.
It has 22AWG silicone wire already pre-soldered ready for the connection to both sides of a Driver (V in&out)
#will need a tail cap switch fitted to finish
Custom corrective optics adapter for Cylindrical Lenses.
Measures: 6 cm x 2.5 cm
Pressed into laser body with rubber o-rings for a tight fit
Cylindrical lens set (3 pieces) coated for 445nm-465nm
Custom Lens platform to "set/glue" the lenses on.
made to be as easy as possible to finish, removable shelf... etc
The Laser measures in total 21.5 cm with the cylindrical lens section fitted.
With a driver, steady hand, alittle time and a tailcap switch, you will have a cylindrical corrected ~3.5W+ 455nm Laser
Any questions please dont hesitate to ask,
Appreciate your view,
Thanks!
For sale is this custom laser.
Cost: Sold USD
Shipping: FREE, tracked international from Germany.
Paypal only
Parts included in sale:
-New NUB05 455nm 3.5W diode,
-Custom 21mm round aluminium heatsink with driver shelf,
-Cylindrical lens correction set coated for 445nm-465nm (3pcs)
-Custom 25mm aluminium host body, takes (1x18650 or 2x 16340)
-Custom 25mm cylindrical correction optics adapter to suit host
Selling this laser as not-complete or to finish as a project, required:
#1 - Install a driver for the NUB05 Diode (2.5-4A)
#2 - Install a Tailcap Switch 22mm Diameter
#3 - Finish Cylindrical lens setup, the 3 Lenses need to be aligned and "set/glued" in the custom lens adapter section provided)
________
INFO:
Laser host/body
Aluminium, silver matt finish
Measures: 15.5cm x 2.5cm
Takes 1x 18650 or 2x 16340 cells
Inside is a new NUB05 455nm 3.5W Diode with Gball lens (Tested working on Benchtop P/S). Its mounted in a custom 21mm Aluminium heatsink also using thermal paste, and the custom heatsink also has a driver shelf measuring 20x20mm, to heatsink a driver of your choice.
It has 22AWG silicone wire already pre-soldered ready for the connection to both sides of a Driver (V in&out)
#will need a tail cap switch fitted to finish
Custom corrective optics adapter for Cylindrical Lenses.
Measures: 6 cm x 2.5 cm
Pressed into laser body with rubber o-rings for a tight fit
Cylindrical lens set (3 pieces) coated for 445nm-465nm
Custom Lens platform to "set/glue" the lenses on.
made to be as easy as possible to finish, removable shelf... etc
The Laser measures in total 21.5 cm with the cylindrical lens section fitted.
With a driver, steady hand, alittle time and a tailcap switch, you will have a cylindrical corrected ~3.5W+ 455nm Laser
Any questions please dont hesitate to ask,
Appreciate your view,
Thanks!
Attachments
Last edited: