Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Not Working AiXiZ 50mW heads

potatorage

potatorage

0
Joined
Mar 20, 2008
Messages
1,341
Points
0
These are the 50mW aixiz modules that you get off of ebay. They are not working, but they have nice crystals, and make great heatsinks. I have 3, looking for$ 25 shipped for each, add $3 for priority mail.
 

Attachments

  • S1030065_2.jpg
    S1030065_2.jpg
    41.7 KB · Views: 104





Kenom

Kenom

0
Joined
May 4, 2007
Messages
5,629
Points
63
These are green dpss so they don't just slot in.  You have to do some modification to either the module or the host to get them to work with red diodes.  It's pretty simple to replace the c-mount inside and get a working green again though.  If a bit spendy for the c-mount.

Do the drivers come with them as well?
 
potatorage

potatorage

0
Joined
Mar 20, 2008
Messages
1,341
Points
0
You can buy a c-mount from day's gb and fix this for about ~$15 (plus shipping)
 
HumanSymphony

HumanSymphony

1
Joined
May 2, 2008
Messages
2,025
Points
63
I'll totally buy one if you could tell me how difficult it would be to scrap the crystals and use this as a c-mount host :cool: I wanna use it for a 1W red :p
 
E

ElektroFreak

0
Joined
Nov 7, 2008
Messages
5,725
Points
0
I sent payment for one module.. check your PMs and confirm if you received it, and let me know when you'll be shipping it off.


@HumanSymphony: These modules are set up for c-mount pump diodes.. I think the only thing you might have an issue with is arranging the internal optics and collimating assembly so they will work. As they come, the internal optics are set up just like a large green laser pointer. Once you remove the crystals, the expanding lens goes with them.. This leaves an opening for the output of the red c-mount to pass through, but I'm not sure that the way the collimating lens is set up will work properly in the absence of the crystals and expanding lens.. Of course, you could just try refocusing the collimating lens.. it may work.
 
HumanSymphony

HumanSymphony

1
Joined
May 2, 2008
Messages
2,025
Points
63
ElektroFreak said:
I sent payment for one module.. check your PMs and confirm if you received it, and let me know when you'll be shipping it off.


@HumanSymphony: These modules are set up for c-mount pump diodes.. I think the only thing you might have an issue with is arranging the internal optics and collimating assembly so they will work. As they come, the internal optics are set up just like a large green laser pointer. Once you remove the crystals, the expanding lens goes with them.. This leaves an opening for the output of the red c-mount to pass through, but I'm not sure that the way the collimating lens is set up will work properly in the absence of the crystals and expanding lens.. Of course, you could just try refocusing the collimating lens.. it may work.
Click to expand...
Yes I had thought about collimation as well :-/ If it works, great. If it doesn't, well that's an expensive piece of fail :p
 
You must log in or register to reply here.




Top