Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

FS: Aurora C6 Kits!

Status
Not open for further replies.
D

Deleted member 22482

Guest
Hello.

I was thinking of buying one of those diode in a module (with glass lens) from rhd or was it dtr, can I just use one of those in the just add diode kit? What would it be outputting? Can I use other color lasers, such as a green laser module? I have a green laser module with a small driver soldered on just at the back of the module, can I put it in or won't it fit?

Thanks.
 





Joined
Oct 28, 2011
Messages
38
Points
0
Hello.

I was thinking of buying one of those diode in a module (with glass lens) from rhd or was it dtr, can I just use one of those in the just add diode kit? What would it be outputting?

Thanks.
Yes, thats what I bought , the M140 diode from him w/ lens and module. You will need to remove the lower half of the module to make it fit.

I love this little host but the heat sink is a little loose. The top is tightend down but it will still spin when I focus. Is there a trick to fix this?

Edit: Tin foil worked great, thanks for the tip from Belgium. Lubed it w/ a little thermal compound too. Dont tell anyone I jimmy rigged it.
 
Last edited:

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
Put some aluminium paper from the kitchen in between. You won't see it when the top is screwed on.

c6heatsink.jpg
 
Last edited:
Joined
Nov 27, 2011
Messages
65
Points
0
Yeah good idea Blord, You can also try putting a couple wraps of thermal tape on it, it'll improve your heatsinking as well. :)
 
Joined
Nov 4, 2010
Messages
404
Points
18
Ah! what a great idea! When I get my other Aurora C6's ill be sure to do this! I think im going to do a full scale tutorial too so nobody will be unsure of what to do! :san:
 
Joined
Dec 12, 2011
Messages
20
Points
0
M140 diode , w/ lens and module -- who did you buy it from, and will they work with the 1.25A kit...
 
Joined
Aug 30, 2008
Messages
6,891
Points
83
They'll work fine with the 1.25A kit.

You can get the diode/module/lens from DTR or Clif at cajunlasers.com
 
Joined
Dec 13, 2011
Messages
35
Points
0
How much mW Will i het put of à 1,25a kit?

I am new whit this, sow i want to order 2 of the 1.25a kits

Send me à pm whit the total costs, it needs to be shipped to Holland

Greetings
 
Joined
Aug 30, 2008
Messages
6,891
Points
83
you can purchase it from the links in the first post. It should output around 1W depending on the diode
 

duzy

0
Joined
Jul 6, 2011
Messages
42
Points
6
Hi, are you able to get any more 1.8A kits? Or you just have 1.25A left?
 
Joined
Oct 28, 2011
Messages
38
Points
0
Just an FYI to builders of this. There isnt much room between the diode pins and the driver that is heat sinked on top of the pill. Shorten the wires and pins or they will hit.
Nice host, pocket size.
 
Joined
Aug 30, 2008
Messages
6,891
Points
83
yeah room is tight. a round driver is in the works for these that just pops into the bottom of the pill.
 
Joined
Dec 13, 2011
Messages
35
Points
0
I kust ordered à 1,25a kit. Do u fit the payment.
And pleas let me know when u gonna send it.

Greetings
 
Status
Not open for further replies.




Top