Blord
0
- Joined
- Dec 24, 2007
- Messages
- 5,356
- Points
- 0
I am selling this new Osram 450nm laser in the famous C6 host. The host needs no introduction, it is a versatile host with a great look.
It has an Osram 450nm diode direct press in the aluminium heatsink. This diode gives a nice single mode dot. The laser is powered by the Ben Boost driver. The front is polished for a shiny look.
The Ultrafire C6 host has a blue tailcap and a black lenscap. The lens is a Aixiz acrylic. This gives in my opinion visually the best looking dot. The lens has no problems with this laser at this power level. Also I made a custom laser warning label to match the wavelength and power.
The Ben Boost driver was set at 373mA which gives a power of ~240mW. Despite not needed the driver is heatsinked at the pill. Only one 3.7V 18650 battery is needed for the working of the laser.
Every component is brand-new. I have tested the laser for few minutes continuous on and everything went fine. The laser gets barely warm and I recommend 60sec on/10sec off.
I am asking $150 for the laser.
I can send it worldwide with registered mail only.
PM if you want one or have any questions.
I will donate 5% of the final price to the laserpointerforum. Without the forum this sale wasn't possible.
***the person must be 18 years or older and know the laser safety rules***
It has an Osram 450nm diode direct press in the aluminium heatsink. This diode gives a nice single mode dot. The laser is powered by the Ben Boost driver. The front is polished for a shiny look.
The Ultrafire C6 host has a blue tailcap and a black lenscap. The lens is a Aixiz acrylic. This gives in my opinion visually the best looking dot. The lens has no problems with this laser at this power level. Also I made a custom laser warning label to match the wavelength and power.
The Ben Boost driver was set at 373mA which gives a power of ~240mW. Despite not needed the driver is heatsinked at the pill. Only one 3.7V 18650 battery is needed for the working of the laser.
Every component is brand-new. I have tested the laser for few minutes continuous on and everything went fine. The laser gets barely warm and I recommend 60sec on/10sec off.
I am asking $150 for the laser.
I can send it worldwide with registered mail only.
PM if you want one or have any questions.
I will donate 5% of the final price to the laserpointerforum. Without the forum this sale wasn't possible.
***the person must be 18 years or older and know the laser safety rules***
Last edited: