Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

CLEANUP SALE - Lots of laser related stuff

Milos

0
Joined
Apr 22, 2007
Messages
862
Points
28
SOLD OUT !!!! CLEANUP SALE - Lots of laser related stuff

As title says, this is big cleanup sale of all laser related stuff I do not need anymore. Due to lack of space, my little shop will have to transform to nursery soon, as my wife and I are expecting a little baby boy in January. For some time, most of my laser stuff and work bench tools will go to boxes. I will need every bit of space and $$ I can get.

I’m more than sure I will build lasers again, but I’m also pretty sure it will be just for me.
I will definitely take a break of about 12 months, and wait fot 12x or higher BR burners to come by and build upgrade for my 330mW 405nm Stingray.

Here is the list I am selling now:
I accept paypal. Everything is priced to go asap, Everything is used, except Drlava V4 drive and some diodes, so there is no warranty on any of the items below.
Contact me by pm before sending money.

ALL ITEMS SOLD !!

#1 SOLD - Protective Goggles for green lasers 532nm from Wicked Lasers.
Only $15 ea.– two available


#2 SOLD ! - Protective goggles for unknown to me wave length , set of two, plus third snap on filter. I believe these are all for IR lasers but different wavelengths. Any help of exact which wavelength these are would be much appreciated.
Price $10


#3 SOLD ! - Coherent laser check. This unit is my first laser power meter, and its proven not accurate for 405nm range. It gets much better for green lasers as it shows about 90-95% accuracy for this 532nm range. However, this meter is still very good for red lasers being dead on accurate with my other coherent laser check, and Kenometar thermal meter I also have.
Price only $70


#4 SOLD - Stingray II 405nm [/U][/B] Power 75-80mW with Acrylic lens with back cut out.
- Great built laser for just pointing around and photography.
PHR diode set at just under 100mA for long on periods and safe operation.
Comes with tripod/clip
Very solid build as all Stingrays. Home made driver based on LM317T. More about it here.
http://laserpointerforums.com/f39/r...tingray-ii-sale-very-limited-offer-40409.html
Teflon threads cover for smooth focus adjustment, and no play at all. Runs on two CR123 rechargeable lithium batteries included as well as small tripod with clip
Price only $70 for 405nm,


#5 SOLD

#6 SOLD ! - Nice little Green laser from Kaidomain outputs about 45-55mW - No IR filter. Focus adjustable if you are careful with right size flat screwdirver. One CR12 3v battery included. Looks perfectly new.
Price $20


#7 SOLD ! - These are two beam combining cubes taken out of some very expensive projectors. Bigger one has width of 6cm, while smaller one is 3cm
Price: Give me best offer. Or it can be combined with other items.


# 8 SOLD - 808nm 1W 9mm multimode diode.[/B][/U] (set of two)
Price:$25


#9 SOLD -808nm 2W 9mm multimode diod - Comes installed in Meredith module with glass lens (http://www.mi-lasers.com/cgi-bin/sho...tion&key=LDC-2)
Price: $40 - or you can get this plus #20 for only $50 shipped within USA


#10 SOLD - 635nm 1W 9mm multimode diode open can. Comes installed in Meredith module with glass lens (Meredith Instruments) and capacitor. I tested it and never got it to output over 70mW. Never figured out ther reason why. I never used proper cooling, nor any heat sink though.
Price $45


#11 SOLD - Some high quality mirrors and filters[/B][/U] also taken out of high end large projectors. If you buy any remaining items over $20, I'll include them for free !!!!!!!!!!!!!!!
Price: best offer or combination with other items


#12 SOLD ! - Some optics from same projectors
Price: best offer, or combination with other items


#13 SOLD - DrLava V4 adjustable driver. Never used
Price $20



#14 SOLD -Heruursciences Collimator for multi mode diodes. I never had time to figure out how to best use them. One I machined to fit stingray front heat sink opening. Optics asembly is the same in all Each has two optics inside. Remaining one is the modified fit one.
Price: $15


#15 SOLD -- A bag of mixed unrated 9mm diodes from heruursciences. Note tested. Great for practicing and experimenting.
Price: Best offer, or combination with other items


#16 SOLD ! Lenses set of 6 most common types. It’s a school experiment kit. 38mm diameter in nice wooden box. Great for playing and shaping the beam and understanding optics.
Price: $10


#17 SOLD ! US Lasers 9mm diode module. US-Lasers: Laser Diodes And Laser Diode Modules
Two sets have only parts for 9mm diode, while one set can house 5.6mm as well.
Price only $6 a set.


#18 SOLD ! - Wicked Laser old fusion (CNI built) This laser was supposed to output 125mW but never did. I used it for trying different collimating lenses. Right now it has no collimating lens nor IR filter, but works as wide spread green beam at about 70mW Collimating lens (from Edmund) is visible on the side, and you can use it by just screwing it in the front and adjusting best collimation.
Price:$30

#19 SOLD - - Meredith module for 9mm diodes with glass lens (1W 808nm diode inside): (http://www.mi-lasers.com/cgi-bin/sho...tion&key=LDC-2)
Price $25


#20 SOLD -808nm 2W 9mm multi mode diode[/U][/B]
Price: $16 ... or you can get this #20 plus #9 for only $50 shipped within USA


Shipping will depend on the item, but estimated $1.50-$7 for USA customers. I will ship internationally too.
In any case, DO NOT send me payments before contacting me and discussing details.

Best regards
 

Attachments

  • 2.JPG
    2.JPG
    325.5 KB · Views: 82
  • 3.JPG
    3.JPG
    270.5 KB · Views: 77
  • 3_1.JPG
    3_1.JPG
    257.1 KB · Views: 75
  • 4.JPG
    4.JPG
    345.1 KB · Views: 108
  • 4_1.JPG
    4_1.JPG
    348.6 KB · Views: 91
  • 6.JPG
    6.JPG
    326.7 KB · Views: 76
  • 6_.JPG
    6_.JPG
    314.1 KB · Views: 78
  • 1.JPG
    1.JPG
    299.8 KB · Views: 77
Last edited:
  • Like
Reactions: mfo





Milos

0
Joined
Apr 22, 2007
Messages
862
Points
28
here we are
 

Attachments

  • 12.JPG
    12.JPG
    304.5 KB · Views: 69
  • 13.JPG
    13.JPG
    390 KB · Views: 80
  • 12_2.JPG
    12_2.JPG
    291.5 KB · Views: 69
  • 11.JPG
    11.JPG
    308 KB · Views: 74
  • 10.JPG
    10.JPG
    293.3 KB · Views: 84
  • 8.JPG
    8.JPG
    391.8 KB · Views: 74
  • 7_1.JPG
    7_1.JPG
    390.7 KB · Views: 80
  • 7.JPG
    7.JPG
    325.1 KB · Views: 79
Last edited:
Joined
Jul 24, 2007
Messages
353
Points
0
#9 is cheaper from the link you provided?
What driver and power supply would be needed for this? Cheers
EDIT:
Nevermind lol the link is just the lens not the diode too :D. Above question still applies :p

John
 
Last edited:

Milos

0
Joined
Apr 22, 2007
Messages
862
Points
28
.........
 

Attachments

  • 14.JPG
    14.JPG
    324.4 KB · Views: 78
  • 14_1.JPG
    14_1.JPG
    342.5 KB · Views: 75
  • 14_2.JPG
    14_2.JPG
    299.6 KB · Views: 78
  • 15.JPG
    15.JPG
    304.4 KB · Views: 84
  • 16.JPG
    16.JPG
    317.7 KB · Views: 72
  • 16_1.JPG
    16_1.JPG
    360 KB · Views: 80
  • 17.JPG
    17.JPG
    311.9 KB · Views: 81
  • 19.JPG
    19.JPG
    291 KB · Views: 76
Last edited:

Milos

0
Joined
Apr 22, 2007
Messages
862
Points
28
and last
 

Attachments

  • 18.JPG
    18.JPG
    371.6 KB · Views: 79
  • 18_2.JPG
    18_2.JPG
    381.3 KB · Views: 85
  • 20.JPG
    20.JPG
    336.8 KB · Views: 76

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Milos,

I'm headed out to dinner and a movie and if I'm very lucky a late night.

I'll deal with PayPal as soon as I see your PayPal info in my PM box. Just warning you it might be tomorrow before I see it ;)

Peace,
dave
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
Hey Milos...
Already sent you 2 PMs over at LEC....
Money in hand.......


Jerry
 

Kakcoo

0
Joined
Jul 26, 2009
Messages
75
Points
0
I don't know jow much you expect from the objects which isn't priced. I'm afraid people will laught at me If I say “I'll give you $20 for #7”. :-|
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
Hey Kakoo...
If you are too shy to quote a price offer in public ......
you can sen a Private message (PM) to Milos...


@ Milos.... PP payment sent.... thanks..

Jerry
 

mfo

0
Joined
Jul 3, 2009
Messages
3,394
Points
0
Edit: Nvm, I know which ones they are now. I am interested in both of them. Would you happen to know the OD rating for them? PM me when you get a chance. Thanks.
 
Last edited:

Milos

0
Joined
Apr 22, 2007
Messages
862
Points
28
Kakcoo - you are the highest bidder :) but are you in need of both, or just one cube? PM me please?

mfo- its these Green LaserShades or check out my picture (damnit grrr) :)
 




Top