Razako
0
- Joined
- Mar 17, 2006
- Messages
- 4,301
- Points
- 113
Up for sale is an adjustable 20mw blu-ray module that was made by Milos. It's powered by any 9 volt batter or power source and the power can be adjusted from <1 to around 20mw by turning the pot. This IS NOT a PHR and it WILL die if you try cranking the power up further. It was built with a custom pcb and has a "soft-start". It's not good for burning, but it makes a nice low power pointer for playing around with. You can probably put it into a new host without too much effort.
I'll also throw in the following DIY parts with this
-A large laser diode heatsink with an adjustable focus lense that screws into the front. It was used for focusing the red diode that was previously in it. The thing was originally one of those 70mw red modules from dx until the diode died.
-A MXDL host from a DIY 80mw blu-ray that died. It includes a custom heatsink.
-Some random little red modules that may or may not work.
Everything for $40 shipped to anywhere in the US.
Pics
I'll also throw in the following DIY parts with this
-A large laser diode heatsink with an adjustable focus lense that screws into the front. It was used for focusing the red diode that was previously in it. The thing was originally one of those 70mw red modules from dx until the diode died.
-A MXDL host from a DIY 80mw blu-ray that died. It includes a custom heatsink.
-Some random little red modules that may or may not work.
Everything for $40 shipped to anywhere in the US.
Pics
Last edited: