Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Accidentally posted in the wrong section guys, reposted in Optics section.

Alaskan

Alaskan

0
Joined
Jan 29, 2014
Messages
12,031
Points
113
Edit: I accidentally posted this in the BST section, I didn't think it would make it through approval to end up here, just now see it did. Sorry guys, I later posted the thread in the Optics section titled as "Question for the optics savvy in regard to beam expansion to reduce divergence", after seeing my mistake. Thank you for your answers and help with this question, but I don't want to add to the thread here further, since it is in the wrong section.

I'm finding it difficult to find cheap AR coated lenses of the correct focal length for use with beam expansion. However, I have an idea, when using a PCX lens which is too small for the size of the spot hitting it, at its focal length, wouldn't the lens produce the reduced divergence of the spot size it is collimating, even if part of the beam were cut off due to the lens being too small?

To exaggerate the situation, what if I put a 2 inch diameter lens in front of a 6 inch spot, wouldn't that 2 inch lens produce the same divergence of a 6 inch expanded beam, except most of the light is cut off? I'm thinking this might be a way to produce a low divergence beam using a relatively small lens diameter and if the power is high enough, such as from a multimode diode, the trade-off might be advantageous, if not in terms of power delivered at an extreme distance, in terms of reduced size?

Any one know the answer to this? This isn't something I'm finding talked about anywhere yet. Perhaps because it is a hair brained idea and won't work?
Click to expand...
 
Last edited:





L

lazeristasUVISIR

0
Joined
Jan 5, 2011
Messages
417
Points
28
Re: Question for the optics savvy in regard to beam expansion to reduce divergence.

Alaskan said:
Any one know the answer to this? This isn't something I'm finding talked about anywhere yet. Perhaps because it is a hair brained idea and won't work?
Click to expand...

This is out of my interest as I'm not interested in loosing power/energy. However you can look for "truncated Gaussian beams" - there are a lot of theory about it.
 
Eracoy

Eracoy

0
Joined
Jul 21, 2014
Messages
173
Points
43
Re: Question for the optics savvy in regard to beam expansion to reduce divergence.

The question you are asking is very similar to the one I ask here. The basic idea, if I understand what you're asking, is to get the "best" (smallest) dot at a distance by expanding farther than the size of your final collimating lens. Yes, if the focal lengths are the same, a big lens and a small one will produce for you the same divergence, just with some truncated.
 
L

lazeristasUVISIR

0
Joined
Jan 5, 2011
Messages
417
Points
28
Re: Question for the optics savvy in regard to beam expansion to reduce divergence.

Eracoy said:
Yes, if the focal lengths are the same, a big lens and a small one will produce for you the same divergence, just with some truncated.
Click to expand...

It would mean that you would get a smaller spot at a far distance. Make a tiny lens, and you would get a focused beam everywhere :evil:

That is not right. :tsk:
 
Eracoy

Eracoy

0
Joined
Jul 21, 2014
Messages
173
Points
43
Re: Question for the optics savvy in regard to beam expansion to reduce divergence.

lazeristasUVISIR said:
It would mean that you would get a smaller spot at a far distance. Make a tiny lens, and you would get a focused beam everywhere :evil:

That is not right. :tsk:
Click to expand...

From what I understand, the size of a laser's dot at distance L from a source with divergence θ and size at aperture of D would be:

D + 2 * L * tan(θ/2)

So as D shrinks, yes the dot would get smaller, but the size of the collimating lens wouldn't affect the divergence, so the spot would still have plenty size at distance.
 
Last edited:
L

lazeristasUVISIR

0
Joined
Jan 5, 2011
Messages
417
Points
28
Re: Question for the optics savvy in regard to beam expansion to reduce divergence.

Eracoy said:
From what I understand, the size of a laser's dot at distance L from a source with divergence θ and size at aperture of D would be:

D + 2 * L * tan(θ/2)

So as D shrinks, yes the dot would get smaller, but the size of the collimating lens wouldn't affect the divergence, so the spot would still have plenty size at distance.
Click to expand...

When you'll start clipping your beam, you need to account the diffraction. Formulas are not that simple.
 
You must log in or register to reply here.




Top