Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

60w 808nm laser FS

MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
Up for sale is my monster burning laser, the 60w 808nm.
The diode has probably less than an hour on it since I bought it.
Rated at 3.5v 60-90 amps, I have never run it at more than 75 amps.

The front lens is spotless, no soot, dirt, or scratches.
Laser diode contains an internal thermistor for temperature monitoring.
Take a cheap thermistor based thermometer and chop off the outdoor sensor. Wire it to the diode for an easy temperature readout :)

Diode: $180
Shipping: $8 in the USA


Click Image to Enlarge

Click Image to Enlarge

Click Image to Enlarge

Click Image to Enlarge

As seen on youtube:
 
Last edited:





D

Daedronus

0
Joined
Dec 23, 2008
Messages
55
Points
0
Sorry, but do you know for a fact it's 808nm?
I had similar diodes that fail to produce more then a few photons of green from a composite green crystal.
 
MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
Daedronus said:
Sorry, but do you know for a fact it's 808nm?
I had similar diodes that fail to produce more then a few photons of green from a composite green crystal.
Click to expand...

This diode is not for pumping DPSS crystals. It was sold to me as 808nm, but I cannot verify the wavelength.

The laser emits a wide stripe, which has a focal point about 4 inches away from the aperture. The stripe does not focus to a point though, it focuses to a line. Great for burning, terrible for trying to pump a crystal. From what I've heard they were originally designed for platesetting and the wavelength tends to be longer than 808nm. Pumping cold coolant through the diode may reduce the wavlength enough, or it might not.
 
FlightLevel350

FlightLevel350

0
Joined
Apr 2, 2009
Messages
355
Points
0
That is some serious burning power there. Why does the line look somewhat purple in the video, could that be just the camera?
 
MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
FlightLevel350 said:
That is some serious burning power there. Why does the line look somewhat purple in the video, could that be just the camera?
Click to expand...

Yeah, cameras tend to see IR as pink or white, my camera has an IR filter on it, but the power of the laser was too much for it to handle :san:
 
Prototype

Prototype

0
Joined
Jun 19, 2009
Messages
2,710
Points
0
You should make another video with your new camera, and burn more stuff :eg:
 
Laser_Ben

Laser_Ben

0
Joined
Apr 29, 2007
Messages
1,076
Points
0
These are 835nm, not 808nm. It is fine as a burning laser, but not as a pump laser.
 
Nordhavn

Nordhavn

0
Joined
Oct 12, 2007
Messages
285
Points
28
You forgot to mention water cooling requirements!

A PC watercooling kit should work though.
 
MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
Just a pump and a small reservoir is sufficient. The diode really doesn't generate all that much heat.

I would hope that anyone buying this diode will know what they're getting into.
 
Raybo

Raybo

0
Joined
Oct 30, 2008
Messages
537
Points
18
Smell that?
I love the smell of plastic in the morning!

I sure hope you did that in your garage. :poke:
 
Gryphon

Gryphon

0
Joined
May 4, 2009
Messages
2,234
Points
83
Ooooooooh, its tempting! But i don't think my folks will let me buy it :cryyy:
 
charliebruce

charliebruce

0
Joined
Nov 22, 2008
Messages
1,506
Points
48
I might be interested, but I don't have much in cash at the moment. I can offer you a trade for a selection of the following items:

  • PHR sleds (I have 15+, IIRC)
  • Kryton Groove with "BDR-F03" diode
  • Dorcy Jr Full-Body V1 H/S PHR-803T build @ around 85mW
  • New-style Dorcy host (see the Dorcy GB thread)
  • Full-Body V2 Dorcy H/S
  • (Possibly for trade, maybe not) Scientech 365 LPM with 5W thermal sensor
  • A selection of flexdrives in various states of working-ness

Let me know if there's anything you'd be interested in. If not, I'll probably be listing bits of this for sale.
Do you have any spare I/R goggles? Also, I'd need the PSU modified for 240v, is it as simple as changing the windings on the PSU transformer?
 
MarioMaster

MarioMaster

0
Joined
Jul 27, 2007
Messages
3,642
Points
63
charliebruce said:
I might be interested, but I don't have much in cash at the moment. I can offer you a trade for a selection of the following items:

  • PHR sleds (I have 15+, IIRC)
  • Kryton Groove with "BDR-F03" diode
  • Dorcy Jr Full-Body V1 H/S PHR-803T build @ around 85mW
  • New-style Dorcy host (see the Dorcy GB thread)
  • Full-Body V2 Dorcy H/S
  • (Possibly for trade, maybe not) Scientech 365 LPM with 5W thermal sensor
  • A selection of flexdrives in various states of working-ness

Let me know if there's anything you'd be interested in. If not, I'll probably be listing bits of this for sale.
Do you have any spare I/R goggles? Also, I'd need the PSU modified for 240v, is it as simple as changing the windings on the PSU transformer?
Click to expand...

Due to the linear design of the PSU I had thrown together, 240v operation would require a new variac and rewound microwave oven transformer. The primaries on these are 120v only. You'd be better off building your own PSU at that point - I can provide assistance if you want to do that.

I don't have an extra pair of goggles to sell with the laser, sorry.

Let me know if you're still interested in buying/trading for it.
 
You must log in or register to reply here.




Top