- Joined
- Dec 15, 2009
- Messages
- 234
- Points
- 0
WTB new or used 405-G-1 in normal aixiz lens assembly. Cant seem to find it anywhere.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
405-g-1
- Thread starter More Power
- Start date
DTR
0
- Joined
- Jun 24, 2010
- Messages
- 5,684
- Points
- 113
- Joined
- Dec 15, 2009
- Messages
- 234
- Points
- 0
Did, I thought he had an ebay page, Laser4u, but the lens isn't in an aixiz module... I was hoping thier was a used one somewhere:thinking:
- Joined
- Nov 4, 2010
- Messages
- 374
- Points
- 0
u can press it into the back of aixiz modul with a vice
- Joined
- Jun 19, 2009
- Messages
- 2,710
- Points
- 0
That works for diodes, but he is looking for a lens.
- Joined
- Nov 4, 2010
- Messages
- 374
- Points
- 0
u can take the 405 g1 modul that laser4u sells, and press it into the back of the aixiz modul so it will fit the heatsink. cheaper that way, and works the same
- Joined
- Dec 15, 2009
- Messages
- 234
- Points
- 0
Not sure I follow you...
- Joined
- Jul 27, 2007
- Messages
- 3,642
- Points
- 63
What are you talking about? If he already has a module with the 405-g-1 lens in it, there is no need for a regular Aixiz module, let alone combining two modules somehow.
Lenses don't get pressed into a module with a vice :thinking:
DTR
0
- Joined
- Jun 24, 2010
- Messages
- 5,684
- Points
- 113
Your not the only one he is confusing the hell out of me.
Is he talking about putting a lens behind the diode on the back of the module.
- Joined
- Dec 15, 2009
- Messages
- 234
- Points
- 0
haha well that wouldnt help much at all.....
- Joined
- Nov 4, 2010
- Messages
- 374
- Points
- 0
RoDnSuE
0
- Joined
- Jul 15, 2010
- Messages
- 191
- Points
- 0
Huh??
He is looking for a 405-g-1 lens in an aixiz module. NOT a diode, heatsink or any other part. Just an aixiz module with a 405-g1 lens already in it.
What are you refering to as a 405 g1 modul??
I'm not trying to be mean, I just don't understand what you are refering to.
Last edited:
- Joined
- Nov 4, 2010
- Messages
- 374
- Points
- 0
Last edited:
DTR
0
- Joined
- Jun 24, 2010
- Messages
- 5,684
- Points
- 113
Huh??
He is looking for a 405-g-1 lens in an aixiz module. NOT a diode, heatsink or any other part. Just an aixiz module with a 405-g1 lens already in it.
What are you refering to as a 405 g1 modul??
Specifically what he is looking for is a G-1 that is threaded for an aixiz module. The laser he has already has an aixiz module in it. He has a G-1 and by what he told me it is in a nut threaded for a Meridith module if I took him correctly. And if this is the case I believe Jay can sell just the nut threaded for aixiz and he can just swap the actual glass out of the old nut into the new one.
RoDnSuE
0
- Joined
- Jul 15, 2010
- Messages
- 191
- Points
- 0
Specifically what he is looking for is a G-1 that is threaded for an aixiz module. The laser he has already has an aixiz module in it. He has a G-1 and by what he told me it is in a nut threaded for a Meridith module if I took him correctly. And if this is the case I believe Jay can sell just the nut threaded for aixiz and he can just swap the actual glass out of the old nut into the new one.
OK...Let me see if I have a bead on this....
Is it a threaded lens holder with a 405-g-1 lens in it that will screw onto the front of an aixiz module somehow??
If not..then I give up
