Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

*SOLD* - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
*SOLD*


Up for sale is one bad little laser.. Its palm sized and puts out a hair under 1.6W on
a 'cold' start with a fresh cell. After all settles, its steady around 1.5W.

The optic is a glass 3 element so theres plenty of power and as good a beam
you can get without correction. When the focus ring is tightened all the way
down the beam is at 'parallel'. All steps have been taken to ensure a solid
action in the focus assembly. With a G1 aspheric the laser puts out 1.86W
and is optional to the buyer.

Heatsink is copper and 6061 aluminum, the LD mount is copper plated. All parts
are fitted together with arctic silver paste on top of a tight fit.

This laser also has 3 modes. These are selectable by a gentle 'tap' on the
switch when the laser is on. Power is these modes are as follows.

-HIGH 1.5-1.6W
-LOW 330mW
-PULSE 750mW

1 Battery , goggles, and case are included. Im still out of chargers so you will
have to supply your own. Battery size is 18350 and works with almost any Li-ion
charger.


Duty cycle in low is nearly unlimited. It takes several minutes just to get warm.
When used on high mode, it will come up to temp in about 1min. The battery should
last 40-45mins between charges..

There is also a threaded mount on the base for a tripod as seen in the pics. The
tripod is not included in this sale.

Warranty is for 2years from date of receipt. The warranty is void if tampering or
heavy abuse results in a failure.

This laser is unused and all new. Tested for stability and output only.

Asking price is 299. CDN O.B.O shipped anywhere. Expedited to the US and Express within
Canada including tracking and insurance. Guaranteed delivery.

PM or post if interested
:beer:

Untitled-111.jpg
 
Last edited:





Joined
Sep 20, 2008
Messages
17,622
Points
113
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

Someone will be happy to carry around 1.5-1.6W
in that size package for sure....
Looking good as usual...


Jerry
 
Last edited:
Joined
May 10, 2011
Messages
1,878
Points
48
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

Your 2 year warranty is very admirable.... anyone that's considering this laser, no one but wannaburn as far as I know offers this

:beer:
 
Last edited:

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

Someone will be happy to carry around 1.5-1.6W
in that size package for sure....
Looking good as usual...


Jerry

:beer: Thanks... This thing turned out to be a little powerhouse.. Just binned a
couple sets of a140's and was only expecting 1.3W... 1.6W at cold, even better :san:


Your 2 year warranty is very admirable.... anyone that's considering this laser, no one but wannaburn as far as I know offers this

:beer:

I spend good time on each build. I match the sizing of each part, and carefully select
what goes in. I wouldnt offer a warranty unless I was 100% on my builds..

Besides, with all the hoopla happening off and on, the buyer needs some sort of
guarantee they are not buying a 'lemon' :D
 
Joined
May 25, 2010
Messages
3,655
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

WOW what a Little beast. That is very nice laser. I like shinny hosts.

:gj:
 
Joined
Sep 17, 2011
Messages
43
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

You done it again wananburn.. This dude seriously has great builts =D Just 1 query though.. Why does this cost the same as the 1.3W 3 Mode you released recently but the output on this is higher :p
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

The B-24's took longer to machine with the 2 piece heatsink.. A 1.3W version of
this laser would put up for 269. or so.. It usually comes down to output vs
build time and accessories included..

I was actually only expecting 1.2-1.3W out of this, but the diode had other ideas :evil:
Same driver and current setting as the 1.3W B-24, just luck of the draw as
far as output goes..
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

Forgot to mention in the OP, which I will update.. This laser does 1.86W
with a G1 lens. Although the G1 is not included with this sale, its also
an option to squeeze more power... :eg:
 
Joined
Mar 27, 2011
Messages
14,125
Points
113
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

This is an awesome little beast of a laser:eg:

I love small builds, especially the more powerful ones. How long does it take to warm up on high?
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Re: 4 Sale - 1.5W 1.6W peak HK-23 Sipik 3-MODE / 2 Year Warranty..

This is an awesome little beast of a laser:eg:

I love small builds, especially the more powerful ones. How long does it take to warm up on high?

It takes about 1min given its size, but considering the output
its not that bad.. The low mode offers a nice balance of power
at just over 300mW and and a long runtime. :cool:

Considering this to be my first post :)

I bought the similar version to this and WB has exceptional craftsmanship.

Great communication and service, couldn't be happier

Can't wait to get my G1 lens on this puppy

http://laserpointerforums.com/f65/full-custom-sipik-hk-23-1-29w-445nm-67252.html

Great build WB!

Good to see you posting.. Thanks for the comments, and im sure
you will enjoy the extra power of the G1 :eg:

The focus ring was as close a match I could get without having
the laser in hand, so let me know how it looks and works :beer:
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
Laser is *SOLD*

Thanks for looking :beer:
 
Last edited:




Top