30x leadlight cases - SOLD OUT

andy_con · Sep 9, 2008

Re: 30x leadlight cases - 18 left

oh bugger, im gona have some unhappy people here!!!!

all have been shipped.

let me see what caps i have to hand and the condition they are in

ben74 · Sep 9, 2008

Re: 30x leadlight cases - 18 left

By all do you mean there all gone or just the ones that wanted the front cap.

Zom-B · Sep 9, 2008

Re: 30x leadlight cases - 18 left

One leadlight for me. Ungutted and un-decapped

. Payment sent.

Thanks for doing this for us.

andy_con · Sep 9, 2008

Re: 30x leadlight cases - 18 left

sorry only the people who have asked for the insides removed.

if anyone has a good way of removing the cap without damaging it, or the side of the leadlight case please let me know

payment received

drlava · Sep 9, 2008

Re: 30x leadlight cases - 18 left

Ok, I didn't ask to have the insides removed, so we are OK right

To take the cap off, use a razor blade and force it in the crack and work it around, this will open the crack a little bit. Keep on working up slowly with thicker blades until the crack is about 1/3mm, at that point you can carefully wedge it off by tilting the blade sideways. Be careful not to let it slip and ruin the finish or your finger.

andy_con · Sep 9, 2008

Re: 30x leadlight cases - 18 left

ummm no blades of difference sizes sady

Tonka · Sep 10, 2008

Re: 30x leadlight cases - 18 left

hey andy can you tell me what the existing sticker says? does it say <1mw? i want to get one but i'm just wary of australian customs who may get suspicious if it's over 1mw even if it is broken...

Thanks

ben74 · Sep 10, 2008

Re: 30x leadlight cases - 18 left

It will be fine its <1mW.

andy_con · Sep 10, 2008

Re: 30x leadlight cases - 18 left

yes <1mw

andy_con · Sep 11, 2008

Re: 30x leadlight cases - 18 left

ok a few tips when pressing the insides out the case.

1 - be very very caeful
2 - press a litle way down till the white plastic sleve reaches the bottom, then use plyers and pull it out.
3 - then carry on pressing the insides out

Kenom · Sep 13, 2008

Re: 30x leadlight cases - 18 left

I got an extra tailcap. So if you are short one I can ship it seperately to the customer.

andy_con · Sep 13, 2008

Re: 30x leadlight cases - 18 left

oh bugger, na i got loads thanks

lazerguy · Sep 16, 2008

Re: 30x leadlight cases - 18 left

Got my 2 leadlights today and they look great, thanx Andy!

Now I just have to wait for the diodes from Stonetek... Then I can start building.

andy_con · Sep 16, 2008

Re: 30x leadlight cases - 18 left

glad you like them

pullbangdead · Sep 16, 2008

Re: 30x leadlight cases - 18 left

How many do you have left now, andy_con? Still 18?

Also, I got my 3, and they look great. One thing though, on 2 of them the button is jammed and won't press at all, it just doesn't move/click at all. I understand the lasers were broken and that's why they're so cheap, but in your experience, does taking apart and reinstalling the button as a component in the new laser free it up so that it can move and work properly? Thanks.

andy_con · Sep 16, 2008

Re: 30x leadlight cases - 18 left

pullbangdead said:
How many do you have left now, andy_con? Still 18?

Also, I got my 3, and they look great. One thing though, on 2 of them the button is jammed and won't press at all, it just doesn't move/click at all. I understand the lasers were broken and that's why they're so cheap, but in your experience, does taking apart and reinstalling the button as a component in the new laser free it up so that it can move and work properly? Thanks.

yes it will, well i had one where the button was stuck. once taken apart etc it wasnt a problem.

30x leadlight cases - SOLD OUT

andy_con

0

ben74

0

Zom-B

0

andy_con

0

drlava

0

andy_con

0

Tonka

0

ben74

0

andy_con

0

andy_con

0

Kenom

0

andy_con

0

lazerguy

0

andy_con

0

pullbangdead

0

andy_con

0

Online statistics

Forum statistics

Share this page