10 XJ-M140 projector's minus diodes for $200 or 5 for $125 Free US Shipping

.

at 10$ the two fans MAKE THIS A FAIR DEAL.
they are Nidec Ultra flow and bigger than the fans from the other Kasios ~2.5"X4"- they come already mounted together in a metal frame of you can take them from the frame and use them alone- My two new DIY PJs will each have 2 of these or more. They will also keep my Lumia boxes nice and cool. One wallwart 12vdc 1A will run a pair of these and they are quiet.

or the dichros at 5$ each-two nice FS mirrors-
the knive edge array


theres a bunch of lenses- some pressure switches and a whole lot more for just10$-

check the going price of the red led..

If there are any left after SELEM I will get 5..

I will ask around and see if I can find four or nine others wanting these & we will have a box sent to SELEM-

Just to remind people of what you're getting here:

- 1x PT-54 30W red LED (600-1050 lumens) ~ $30 @ Mouser.com
- Nidec fans as Hakzaw1 pointed out
- High quality dichro sets (I got about > 98% or so transmission/reflection if I recall)
- Large frontside mirrors
- Motors, heatsinks
- knife-edge array w/optics and front-side mirrors (if you take it apart)
- Lots of optics
- Compact 12V/10A + 5V/10A DC power supply (you could power your fans with this if you want)
- Carrying case

I'd pick some up myself, if I didn't already have 5x I got from a previous order from DTR.

back a while I got a ten pack of the A-140s from DTR- they made very nice gifts for my laser friends who had not seen these PJs- I gave one to Sam at SELEM 2011.
just check the going rate at Feebay- DTR is selling for less than half... way less.

and free shipping-- too.

Plenty still available.

So are most items and optics the same as in the A140s? I ask because I still have 5 empty projectors of those. But do these differ in any way (I guess the fan is one difference?). And are the Red LEDs the same power?

The focusing unit and the knife edge array are larger and use different optics but most everything else between them are the same like the dicros, mirrors and optics. The Red LED is slightly different. The M140 one has a slightly higher threshold current and there is a thread on the differences that we have noted but there is no specific information on it.
http://laserpointerforums.com/f66/comparison-phlatlight-leds-out-m140-vs-a140-73247.html#post1056271

Thanks for the answer DTR. Sounds like I won't need the M140s immediately then, but if you somehow have them for a while, I'm sure I will pick up more down the road. Thanks.

Still plenty left.:beer: