Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

ps3 laser

Joined
Oct 20, 2008
Messages
351
Points
0
Hi guys! :D

Where can I buy cheap ::) ps3 sleds/diodes

and what would be a good ma to give to one to make it last a long time and how powerful would it be?

do ps3 diodes fit in aixiz modules too?
 





Joined
Feb 23, 2008
Messages
2,832
Points
48
AusLasersSuck said:
Hi guys!  :D

Where can I buy cheap  ::) ps3 sleds/diodes

and what would be a good ma to give to one to make it last a long time and how powerful would it be?

do ps3 diodes fit in aixiz modules too?
1. daguin may have some(or similar) but phrs are cheaper
2.~30-40ma i think
3. yes the ps3 diode is a 5.6mm can so it will fit in an aixiz module
 
Joined
Sep 20, 2008
Messages
17,622
Points
113
Go to the BST section and see who is selling PS3 sleds...

As for the ma... that has been talked to death in the posts.... so you'll
need to read.... read... and read some more.... the information is there...

The Search link is your friend.... ;)

Jerry
 

JLSE

1
Joined
Dec 13, 2007
Messages
3,580
Points
0
AusLasersSuck said:
Hi guys!  :D

Where can I buy cheap  ::) ps3 sleds/diodes

and what would be a good ma to give to one to make it last a long time and how powerful would it be?

do ps3 diodes fit in aixiz modules too?


38mA I believe was the sweet spot for the PS3 diodes. I had run a few at 50mA but did have some die at that current. If your looking to run them at 5mW, I can test one of the few I have left, but it should be around 30mA or a tad less. IIRC the threshold was around 20mA give or take.
 




Top