- Joined
- Feb 17, 2010
- Messages
- 82
- Points
- 8
I finally built one of my PHR modules (and my ever-decreasingly sized DDL drivers -- it's down to a footprint hardly bigger than the LM317) into a decent(ish) host.
Also, I set the diode correctly! I should have taken people seriously when they said to make sure that a 405nm is more than flush with the AIXIZ setting. I can actually focus this one! And I thought having a big blurry dot at 5' was just an inevitable feature of bluray diodes !
I've got one more PHR813T left, which I plan on building with a variable-current driver, with its max set at 250mA (not that I intend to actually run it that high). What kind of experiences have people had driving this diode it currents higher than 125mA? I'm just looking for anecdotes; I'm sure someone here has graphed it well...
Also, I set the diode correctly! I should have taken people seriously when they said to make sure that a 405nm is more than flush with the AIXIZ setting. I can actually focus this one! And I thought having a big blurry dot at 5' was just an inevitable feature of bluray diodes !
I've got one more PHR813T left, which I plan on building with a variable-current driver, with its max set at 250mA (not that I intend to actually run it that high). What kind of experiences have people had driving this diode it currents higher than 125mA? I'm just looking for anecdotes; I'm sure someone here has graphed it well...