my first bluray build

bennett326 · 08-01-2011, 03:05 AM

hey,
this is my second laser i have built it is a phr-805t with a diy lm1117 based driver in the famous c6 with a diy heat sink.

i got my diode and module from modwerx

the c6 from dx (of course)

and the lm1117 from digikey my driver was pretty simple all i did was attach a 10 ohm resister and a ceramic cap to get a steady 123-125 ma

for my heat sink i simply took a piece of aluminum rod stock drilled a hole in it with my drill press and used thermal adhesive to add washers for the lip

NOW FOR PICTURES AND BEAMYS

when i re-sized the pictures online it put them in that attached folder and i don't now how to put each one as a thumbnail sorry...but still take a look i like them allot

thanks,
bennett

freeloader700 · 08-08-2011, 03:53 PM

Very nice. What do you think the mw output is on that? What are you using for Power? Any other pictures?

bennett326 · 08-08-2011, 05:20 PM

sure i will upload more pics in a bit. i am using 2x cr123a lion batteries.

as far as the power output , i don't have a lpm but it is running at 125ma so anywhere from 80-110 mw according to some of the test that have been done on this forum

freeloader700 · 08-10-2011, 10:25 PM

Ok cool. You have those other pictures yet?

bennett326 · 08-10-2011, 10:30 PM

Sorry totally forgot one sec

My phone wont uploud them i will win i get to a computer

bennett326 · 08-10-2011, 11:35 PM

pics of build

[IMG]http://my.picresize.com/J3CA2UXL0A

[IMG}Free Online Picture Editor - Crop and Resize photos, images, or pictures online for FREE!

freeloader700 · 08-12-2011, 12:52 AM

Thanks, I think I might try to do a similar build to this

bennett326 · 08-12-2011, 01:37 AM

go for it i love mine!!! any questions im happy to help just pm me

or post it here

freeloader700 · 09-02-2011, 02:42 PM

Can you draw up a schematic on how you hooked it all up ?

bennett326 · 09-02-2011, 02:50 PM

Quote:

Originally Posted by freeloader700

Can you draw up a schematic on how you hooked it all up ?

sure ill do it when i can being that im in school

bennett326 · 09-03-2011, 03:51 AM

of the driver or in general

sorry bout the doublepost

freeloader700 · 09-07-2011, 04:39 PM

of the driver. Actually of both would be good.

Elektrotechniker · 09-07-2011, 04:40 PM

Did you use the DIY heatsink method with something like a pill? I remember I saw somewhere that if you use a phr or loc diode , you can skip a machined heatsink.

bennett326 · 09-07-2011, 05:45 PM

Quote:

Originally Posted by Silvershot

Did you use the DIY heatsink method with something like a pill? I remember I saw somewhere that if you use a phr or loc diode , you can skip a machined heatsink.

nope i used a aluminum cable stop and a drill press

Elektrotechniker · 09-07-2011, 05:56 PM

Quote:

Originally Posted by bennett326

nope i used a aluminum cable stop and a drill press

Guess I missed that part while quickly taking a look at the OP

Nice first build. My first one was a PHR-803T in a medium sized project box with a huge DDL driver in it. I didn't even used a heatsink

Some months ago I made a very small lm1117 based linear driver and was comparing the size of it to the first blu ray build

+1 to get you going

bennett326 · 09-07-2011, 06:04 PM

Quote:

Originally Posted by Silvershot

Guess I missed that part while quickly taking a look at the OP

Nice first build. My first one was a PHR-803T in a medium sized project box with a huge DDL driver in it. I didn't even used a heatsink

Some months ago I made a very small lm1117 based linear driver and was comparing the size of it to the first blu ray build

+1 to get you going

thanks this was actually my first build

my first build ever heard of 2x 18650s for a loc

i thought they were aa sized

08-08-2011, 03:53 PM	#2
freeloader700 Class 1M Laser Join Date: Jul 2011 Location: Oregon Posts: 128 Rep Power: 4	Re: my first bluray build Very nice. What do you think the mw output is on that? What are you using for Power? Any other pictures?

08-08-2011, 05:20 PM	#3
bennett326 Class 3R Laser Join Date: May 2011 Location: tennessee Posts: 1,944 Rep Power: 114	Re: my first bluray build sure i will upload more pics in a bit. i am using 2x cr123a lion batteries. as far as the power output , i don't have a lpm but it is running at 125ma so anywhere from 80-110 mw according to some of the test that have been done on this forum

08-10-2011, 10:25 PM	#4
freeloader700 Class 1M Laser Join Date: Jul 2011 Location: Oregon Posts: 128 Rep Power: 4	Re: my first bluray build Ok cool. You have those other pictures yet? __________________ Selling 5/8" crackled uranium marbles 3 for $6.00 + free shipping to US. Click below http://www.ebay.com/itm/170762584005...#ht_522wt_1185

08-10-2011, 10:30 PM	#5
bennett326 Class 3R Laser Join Date: May 2011 Location: tennessee Posts: 1,944 Rep Power: 114	Sorry totally forgot one sec My phone wont uploud them i will win i get to a computer __________________ read these before starting a thread THE i want to build a laser thread [/LEFT] INDEX a work in progress my builds LPC in a diy host HERE phr build in a c6 HERE OTHER lasers/laser related things PT-30k galvos 300mW 532nm analog labby audiolase DAC(sold) Etherdream DAC review here coherent photons make me happy benneh: it might have been a dye laser pumped by a argon benneh: HOLY SH!T benneh: i am such a nerd ARG: AHHAHAHHAHHAHAAHA **need any super cheap paintball stuff PM ME ** Last edited by bennett326; 08-10-2011 at 10:34 PM.

08-10-2011, 11:35 PM	#6
bennett326 Class 3R Laser Join Date: May 2011 Location: tennessee Posts: 1,944 Rep Power: 114	Re: my first bluray build pics of build [IMG]http://my.picresize.com/J3CA2UXL0A [IMG}Free Online Picture Editor - Crop and Resize photos, images, or pictures online for FREE! Last edited by bennett326; 08-10-2011 at 11:36 PM.

08-12-2011, 12:52 AM	#7
freeloader700 Class 1M Laser Join Date: Jul 2011 Location: Oregon Posts: 128 Rep Power: 4	Re: my first bluray build Thanks, I think I might try to do a similar build to this __________________ Selling 5/8" crackled uranium marbles 3 for $6.00 + free shipping to US. Click below http://www.ebay.com/itm/170762584005...#ht_522wt_1185

08-12-2011, 01:37 AM	#8
bennett326 Class 3R Laser Join Date: May 2011 Location: tennessee Posts: 1,944 Rep Power: 114	Re: my first bluray build go for it i love mine!!! any questions im happy to help just pm me or post it here __________________ read these before starting a thread THE i want to build a laser thread [/LEFT] INDEX a work in progress my builds LPC in a diy host HERE phr build in a c6 HERE OTHER lasers/laser related things PT-30k galvos 300mW 532nm analog labby audiolase DAC(sold) Etherdream DAC review here coherent photons make me happy benneh: it might have been a dye laser pumped by a argon benneh: HOLY SH!T benneh: i am such a nerd ARG: AHHAHAHHAHHAHAAHA **need any super cheap paintball stuff PM ME **

09-02-2011, 02:42 PM	#9
freeloader700 Class 1M Laser Join Date: Jul 2011 Location: Oregon Posts: 128 Rep Power: 4	Re: my first bluray build Can you draw up a schematic on how you hooked it all up ? __________________ Selling 5/8" crackled uranium marbles 3 for $6.00 + free shipping to US. Click below http://www.ebay.com/itm/170762584005...#ht_522wt_1185

09-03-2011, 03:51 AM	#11
bennett326 Class 3R Laser Join Date: May 2011 Location: tennessee Posts: 1,944 Rep Power: 114	Re: my first bluray build of the driver or in general sorry bout the doublepost __________________ read these before starting a thread THE i want to build a laser thread [/LEFT] INDEX a work in progress my builds LPC in a diy host HERE phr build in a c6 HERE OTHER lasers/laser related things PT-30k galvos 300mW 532nm analog labby audiolase DAC(sold) Etherdream DAC review here coherent photons make me happy benneh: it might have been a dye laser pumped by a argon benneh: HOLY SH!T benneh: i am such a nerd ARG: AHHAHAHHAHHAHAAHA **need any super cheap paintball stuff PM ME **

09-07-2011, 04:39 PM	#12
freeloader700 Class 1M Laser Join Date: Jul 2011 Location: Oregon Posts: 128 Rep Power: 4	Re: my first bluray build of the driver. Actually of both would be good. __________________ Selling 5/8" crackled uranium marbles 3 for $6.00 + free shipping to US. Click below http://www.ebay.com/itm/170762584005...#ht_522wt_1185

09-07-2011, 04:40 PM	#13
Elektrotechniker Class 3B Laser Join Date: Nov 2008 Posts: 3,911 Rep Power: 164	Re: my first bluray build Did you use the DIY heatsink method with something like a pill? I remember I saw somewhere that if you use a phr or loc diode , you can skip a machined heatsink.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode