Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Little quentions about PHR 803T

Joined
Dec 8, 2008
Messages
2
Points
0
hi, at first this is a very good community!

i am Marcus and very interested in laser but totally new at this area. i am from germany so sorry for my bad english.

i would use a PHR 803T at 4,5V is this possible? all drivers i´ve see have 6V or more. my lamp have 3 x 1,5V AAA this the kind why i would use 4,5V. i am right when i say, i need the PHR 803T diode, an driver module, the aixiz laser module housing and 4,5V battery? or do i need more?

Thanks!
 





Joined
Dec 8, 2008
Messages
2
Points
0
and what is an good driver? there are any 2V AAA batterys? then this is they easiest way for me.
 

daguin

0
Joined
Mar 29, 2008
Messages
15,989
Points
113
Danjoo said:
2 volt aaa are not existent.
But 3,6 volt are available from DX and ebay maybe.
http://www.dealextreme.com/details.dx/sku.974
gruss
daniel


If you are planning on using the 3.6V rechargeable batteries, remember this . . . . When fully charged they are actually producing 4.2V. Keep that in mind when looking at the upper limit of voltage for your application.

Peace,
dave
 




Top