Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Little Help Needed With Host

Joined
May 31, 2009
Messages
3,239
Points
63
Hey, I have found this flash light which looks like a pretty good host for my blu-ray laser.. what do you think of it, pictures are below:

host1.jpg

host2.jpg


I will be gutting it and putting in a flexdrive and Aixiz module in there.. and ideas, help, tips are very much appreciated since this is my first laser.. also any ideas on how to make a sink for this host.. I have access to a lathe and other tools just need some tips (such as material, shape, size ect).

item info

Size: Length 130mm x Diameter 40mm
Powered by 3 X AAA
 
Last edited:





Joined
May 31, 2009
Messages
3,239
Points
63
or would this be a better host??

host3.jpg


same question...

item info

o Diameter: 3.8cm/1.5inch
o Body diameter: 2.7cm/1.1inch
o Length: 12.5cm/5inch
o Weight: 102g
 
Last edited:
Joined
May 12, 2009
Messages
1,403
Points
0
bro thats the MXDL i do believe... search the forums for "jayrob MXDL" he sels heatsinks cutom made SPECIFICLY for that flashlight. i have a customers sitting in front of me right now. great host choice, one of the easiest builds by far.

and please SEARCH before asking... some people will make a fuss about it as it is inconvenient. but welcome to LFP and keep up the good work. we wanna see pics when its done.
 
Joined
Dec 23, 2008
Messages
3,948
Points
63
bro thats the MXDL i do believe... search the forums for "jayrob MXDL" he sels heatsinks cutom made SPECIFICLY for that flashlight. i have a customers sitting in front of me right now. great host choice, one of the easiest builds by far.

and please SEARCH before asking... some people will make a fuss about it as it is inconvenient. but welcome to LFP and keep up the good work. we wanna see pics when its done.

ROFL..... dark i think you are becoming one of those people. :D
 
Joined
May 31, 2009
Messages
3,239
Points
63
bro thats the MXDL i do believe... search the forums for "jayrob MXDL" he sels heatsinks cutom made SPECIFICLY for that flashlight. i have a customers sitting in front of me right now. great host choice, one of the easiest builds by far.

and please SEARCH before asking... some people will make a fuss about it as it is inconvenient. but welcome to LFP and keep up the good work. we wanna see pics when its done.

really wow... they are pretty cheap.. but the reason I asked is beacuse I can make he heat sink myself.. just need some tips.. any one??
 
Joined
Dec 23, 2008
Messages
3,948
Points
63
basically you seem like you know the basics. so the next step is to get it to look as cleean as possible when finished. since diy is not scienc you must figure it out on the fly. and about the heat sink. make sure it is a fit as tight as possible for better thermal transfer. if it is a little loose then drill a small hole in the head sink and thread it for a set screw.
 
Joined
Jan 20, 2008
Messages
1,724
Points
0
ROFL..... dark i think you are becoming one of those people. :D

It's not hard to become "one of those people", basically you just have to come here every day, see the same thread posted 5x per day, search for what they're looking for, try to reply with productive advice to each of them, get no thanks, get fed up and figure it's best if you teach a man to fish rather than catching fish for people all day.

I try really hard not to be "one of those people", and I'll still go and find the relevant information for people, link them to the appropriate thread, and then say YOU SHOULD HAVE USED THE SEARCH FUNCTION BECAUSE YOU JUST WASTED FIVE MINUTES OF MY LIFE! ;)

But yeah, this isn't a topic that comes up often, so yeah, here are the relevant threads:
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22511
http://laserpointerforums.com/laser_pointer_forums_3/forum/showthread.php?t=22512
These threads will show you the construction of these flashlights, and how we've used them as hosts in the past. If you'd like to buy a premade heatsink for them you should contact jayrob directly, they're pretty cheap and well made.
 
Joined
Dec 23, 2008
Messages
3,948
Points
63
LoL. i am one too. it's funny how that works. the longer you are here the irritation slowly creeps in. I was that noob getting mad at more knowledable people.
 
Joined
Oct 20, 2007
Messages
128
Points
0
really wow... they are pretty cheap.. but the reason I asked is beacuse I can make he heat sink myself.. just need some tips.. any one??

Fabricating your own heat sink is pretty simple if your knowledgeable with measuring tools and know your way around a lathe. I make mine out of 6061 aluminum and a few special ones I used 7075. I have also made them from brass and copper. For tooling any HSS cutter is best for soft materials, plus you will need something for the bore. A drill works fine if you can get your hands on one that is a bit undersized. A cheap 12mm bit will produce a hole that is sloppy. A undersized reamer works good.
To get your spec's you will need to measure the inside of the host's head of course. I usually just measure the components that I removed from the assy and go from there. I may need to make one and try it and then modify the spec's a bit before I have a working model. Don't forget to write everything down you never know when you might need to make another one just like it.

It might sound like a pain but it's really simple once you have the lathe set up. A regular sink should only take about 10 mins or less to make if you know how to turn.

Good Luck and let us know how you make out.

Chuck
 
Joined
May 31, 2009
Messages
3,239
Points
63
Thank you very much CRFultz .. I will try it out soon.. btw I was also thinking of 6061 aluminium but wasnt too sure if it can be used on my lathe (dont want to break it).. but if it can be used on urs it propbably be used on my dads work one ($4000)..

thanks every one for links and help.. I will send some pics after I have made it... or I could be lazy and buy jayrobs heatsink and host... I will keep you posted.
 




Top