"I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm PHR-803T

HEY everyone, i am trying to building a blu ray laser i have a GGW-H20L 6x Blu Ray diode and thats it.. I DONT KNOW WHAT ELSE I NEED TO GET THIS UP AND RUNNING.!!! ALSO i want to put it in a flashlight specificly the mag light if thats posible..???

so i new i came to the right place for help what i need to know is what heat sink i need??? what driver do i need??? what module with focusing lens do i need??? and if i missed anything plese let me know......?????

if possible please give it in detail because iam a beginner and dont really understand to much thank you thank you thank you...

Angelos, G.

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Didn't you post the same type of thing last night? Begging for help? With all do respect use the search button. All the information you're going to need is on here, you have to look for it. There's plenty of guides and tutorials located in their respective section.

Check out Jayrob's tutorials, there fantastic. No one is going to hold your hand through this, so do the research on your own instead of asking others to spoon feed it to you. Don't be lazy.

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Rob said:

Didn't you post the same type of thing last night? Begging for help? With all do respect use the search button. All the information you're going to need is on here, you have to look for it. There's plenty of guides and tutorials located in their respective section.

Check out Jayrob's tutorials, there fantastic. No one is going to hold your hand through this, so do the research on your own instead of asking others to spoon feed it to you. Don't be lazy.

Click to expand...

yea i look all last night i dont have a problem look but when you dont know what your looking for and you dont understand anything thats what forums are for right!!!

iam not asking someone to spoon feed me but we all started at the same place i did as a beginner so in the amount of time it took you to write what you did you could have explained to me what i needed!!! That the hole point of a forum ..for information and help. if you dont understand what does a normal person do ask for help!!! not keep reading somthing that you dont understand it wont do anything!!!

well if you dont want to help me then stop writing me just because you no about laser dosnt mean everyone does,so if your not going to help then there is plenty of other people on this forum that would not have a problem helping me!!! and your the lazy one not helping me at least iam asking for help and trying to build this laser. its people like you that gives forums bad experience go bother someone else if your not going to help!!!

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Try reading the FAQ and the stickies in the "Tutorial" board.

Getting angry with those trying to help you will NOT get you more help. It will get you ignored.

Peace,
dave

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

We help people who help themselves. Jumping on the forum acting like a spoiled child not getting his way is not helping himself. Read the stickies, and posts to get an idea of what you want, then we will help you if you are stuck on something. If not, then leave.

Spoon feed :thinking: where have I heard that before?

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Whoo Cowboy now if Rob was lazy he wouldn't have even answered you in the first place !
I thought he was giving you some pretty good info, just be glad Jerry hasen't seen your lame reply LOL, you say you want items to build a laser but you can't look them up because you don't know what they are and it sounds like you want some one to tell you every thing you need would you like one of us to come over and solder it all together for you also ?
You need to read read read that is how man learns theare is volumes of great info here for all to READ and learn from this is how I did it and how most everone else here did it, now it's your turn if you read a little more you will understand more the more you under stand the easer it will be for you to order the right parts and if YOU know what the right parts are then you probly will know how to put them together, it's fun, just type a question of what you want to know in the blank box next to the search button then hit the button. if there is a possibility you ask a question that has never been asked befor a light on my computer will flash and you will be directed to me or Dave or Jerry or Igor or Jay or Glenn or Moh or some one with the right answer for you !
Have a nice day
Pyro...

lazerboy123 said:

yea i look all last night i dont have a problem look but when you dont know what your looking for and you dont understand anything thats what forums are for right!!!

iam not asking someone to spoon feed me but we all started at the same place i did as a beginner so in the amount of time it took you to write what you did you could have explained to me what i needed!!! That the hole point of a forum ..for information and help. if you dont understand what does a normal person do ask for help!!! not keep reading somthing that you dont understand it wont do anything!!!

well if you dont want to help me then stop writing me just because you no about laser dosnt mean everyone does,so if your not going to help then there is plenty of other people on this forum that would not have a problem helping me!!! and your the lazy one not helping me at least iam asking for help and trying to build this laser. its people like you that gives forums bad experience go bother someone else if your not going to help!!!

Click to expand...

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Wow, I'm amazed by the audacity of some people.

LOL. I had no idea that this guy got so angry at me. Oh well, some people have to learn things the hard way.....

@Flaminpyro I agree that is was good that Jerry didn't see this, this guy would have gotten reamed. Hahaha.

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Rob said:

Wow, I'm amazed by the audacity of some people.

LOL. I had no idea that this guy got so angry at me. Oh well, some people have to learn things the hard way.....

@Flaminpyro I agree that is was good that Jerry didn't see this, this guy would have gotten reamed. Hahaha.

Click to expand...

:crackup::crackup::crackup: You should have read the crap he sent me in a PM! :banned:

Peace,
dave

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

Rckstr/Flexdrive driver, Aixiz Module and homemade heatsink. If you can't machine one I recommend you to buy a kit from someone in the forum. The kits usually consist in a host+heatsink kit

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

daguin said:

:crackup::crackup::crackup: You should have read the crap he sent me in a PM! :banned:

Peace,
dave

Click to expand...

Hahaha, I'm not surprised.

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

To everyone who i offended i was an asshole i should not have said what i said and iam sorry i was just frustrated,but there is no excuse i hope you can except the i am trully sorry for what i said and i should have not jumped done anyone throught i hope we can move n and put this behind us iam sorry to all and this forum

Angelos G....


please forgive me !!!!!!!

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

lazerboy123 said:

To everyone who i offended i was an asshole i should not have said what i said and iam sorry i was just frustrated,but there is no excuse i hope you can except the i am trully sorry for what i said and i should have not jumped done anyone throught i hope we can move n and put this behind us iam sorry to all and this forum

Angelos G....


please forgive me !!!!!!!

Click to expand...

Deja Vu :tinfoil:

Peace,
dave

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

LaserBoy here ya go,this is a great kit, you can choose what you want, Man I feel your frustration just take it easy it will get better.


I am sending you a PM this site wont let me post the link I want all because of some argument between the head honcho here and Steve over their. Its a shame that people cant see past their differences, I mean if I am mad at some one I am not going to be mad or try to stop any one from talking to or being friends with that person.


So we suffer because some one is mad at some one else, I fail to see the rationality.

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

FrostyTheDadMan said:

LaserBoy here ya go, this is a great kit, you can choose what you want

Click to expand...

Frosty,

You've been around long enough to know that won't work.

Peace,
dave

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

I honestly would first ask Mohrenberg. he's selling great stuff at so damn good prices lately

Re: "I NEED HELP" !!!BEGINNER!!! First laser Build Iam using a 405nm GGW-H20L 6x Blu

FrostyTheDadMan said:

I mean if I am mad at some one I am not going to be mad or try to stop any one from talking to or being friends with that person.


So we suffer because some one is mad at some one else, I fail to see the rationality.

Click to expand...

If I was mad or disliked you for something you did, I'd be damned if I gave you any business through my web site. What's so hard to see the rationality in that?