Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

glass or plastic

Joined
Dec 6, 2008
Messages
1,581
Points
63
I have been using the Aixiz coated glass lenses on my Blu-Ray builds.

The coating will still be fairly effective @ 405 nm.
Reflection will be less than any uncoated lens.

I don't have a power meter yet, but burning at close range is quicker with the glass lenses.

Meridith is even better since it is a shorter focal length.

I do have about 6 new glass lenses I'm testing.

One looks very promising.

LarryDFW

Edit: Jayrob also has found a 4mm FL lens that beats the Meridith.
 





alx

0
Joined
Jan 8, 2009
Messages
229
Points
0
frogger said:
You can also use the lens from the sled and its already AR coated for 405nm, look up the thread in tutorials.

I found that thread some time ago, but now, i cannot find it again... can you post the link where is described procedure regarding how to use lens from phr/gbw sled?

alx
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Update:

I just sampled a glass lens for 405nm that is excellent. But it is expensive. And it needs to be custom mounted into an AixiZ glass lens nut. (modified) So, waiting for Igor's GB is still the best bet. I want to compare the best lens he found with these though...

This is an excellent blu-ray glass lens that gives a very nice dot, and about 26% increase in power over AixiZ acrylic! :eek:
Jay
http://www.laserpointerforums.com/forums/YaBB.pl?num=1236386077/0
 
Joined
Dec 6, 2008
Messages
1,581
Points
63
Jayrob;

I think that you and I are testing the same lens.

Mine is the same diameter, back focal length, NA, and low-loss @ 400-600 nm.

I have been getting very good results as well.

I expect to be buying some more of them. :cool:

LarryDFW
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Yes, someone else told me about the supplier. And there is a good price break if you buy 50 to 100, but I don't want to do that. Because I respect Igor and he did a lot of R&D to find the right lenses...

Plus, I believe he is going to have them pre-mounted in a nut fit for AixiZ.

What I am offering is expensive. That is, the cost in parts alone is about $45 bucks. I will be making about $15 dollars for the AixiZ glass lens nut modification and custom spacer.

So I don't expect too many people to ask me to do the mod because of the price. And the few that do, should not really impact Igor's upcoming GB...
Jay
 




Top