Easy laser build. Blu-ray.

Hi everyone, I'm new to this forum but I've browsed around it several times and it kicks ass in the laser world. I was wondering how I can build a burning blu ray laser without having to solder anything. I have no experience with it, nor do I have the necessary equipment. As of right now I don't have any parts for the build either but thats why I'm seeking help. Any helpful info would be greatly appreciated.

Welcome to the forum!

Typically building is not easily done without a soldering iron.
You can find a soldering iron for fairly cheap these days, so you may want to consider it

You could buy the diode with the driver pre-attached here:
https://sites.google.com/site/dtrlpf/home/diodes/s06j-12x-405-diodes

Then get a battery holder and twist the bare ends of the wire together, maybe grab a switch as well.

You can't build one if you can't solder...

However, there are complete laser to buy from LPF members on BST section.

ARG said:

Welcome to the forum!

Typically building is not easily done without a soldering iron.
You can find a soldering iron for fairly cheap these days, so you may want to consider it

You could buy the diode with the driver pre-attached here:
https://sites.google.com/site/dtrlpf/home/diodes/s06j-12x-405-diodes

Then get a battery holder and twist the bare ends of the wire together, maybe grab a switch as well.

Click to expand...

Thanks for your help. I've found the diode and module I want. Next step is to find a host I like.