Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Blu Ray makes your TV glow!

E

eternal981

0
Joined
Jun 14, 2009
Messages
10
Points
0
Check it out! Turn the TV off (old school tv, not LCD or Plasma), make sure it's dark in the room, and swipe your blu ray across your tv from the other side of the room. Works better if your eyes are acclimated to the darkness, and even best yet if you look away or close your eyes while the laser is on. Doesn't last long, but it still glows!

All 4 of my TVs turned out fine, but your results may vary. Can't see how it'd hurt a tv, but don't blame me if it does something permanent! I've still got a dead pixel on my laptop from my 150mw green. And as always, watch those eyes! Reflections are a killer.


Disclaimer: Experiment performed by a professional, in a controlled living room, from an even more controlled couch. Do not try this at home.
 





bobhaha

bobhaha

0
Joined
May 31, 2009
Messages
3,239
Points
63
Awesome will try this out once i got my blu ray up and running... just curious what happened with the 150Mw greenie??
 
E

eternal981

0
Joined
Jun 14, 2009
Messages
10
Points
0
Well it screwed up a pixel on my laptop screen, so don't try it on anything LCD/Plasma. I don't think i had it on for more than about a quarter of a second. Ah well, it's in the corner anyways. I did that a while ago though, not tonight. I tried the green on the TV tonight, and it did nothing at all.
 
pullbangdead

pullbangdead

0
Joined
Aug 25, 2007
Messages
2,007
Points
63
CRT TVs use an electron beam to excite a phosphor to make colors, cathodoluminescence. You're just using a photon beam instead of an electron beam. Photons doing the exciting instead of electrons, so it's photoluminescence, or as it is called more commonly, fluorescence.

(The term photoluminescence is generally reserved for the scientific arena, for when you are actually analyzing the light that is coming back out.)
 
Last edited:
Benm

Benm

0
Joined
Aug 16, 2007
Messages
7,896
Points
113
Its a wellknow thing indeed. What works even better are the really old monochrome green monitors (from the 80s), they light up brilliantly. Same goes for oscilloscope screens. Relatively safe to try, but do not focus in into a pinpoint as that is likely do damage the phosphor layer. Wide beam = fine.
 
bobhaha

bobhaha

0
Joined
May 31, 2009
Messages
3,239
Points
63
wow you guys know alot about the inner workings of alot of thing LOL... so how does it damage a LCD/Plasma screen then (i mean when it is not focsed to a pin head!)
 
borgqueenx

borgqueenx

0
Joined
Jun 30, 2008
Messages
1,660
Points
48
bobhaha said:
wow you guys know alot about the inner workings of alot of thing LOL... so how does it damage a LCD/Plasma screen then (i mean when it is not focsed to a pin head!)
Click to expand...

you create dead or sleeping pixels...
 
Cenobite9

Cenobite9

0
Joined
Oct 10, 2008
Messages
314
Points
18
borgqueenx said:
you create dead or sleeping pixels...
Click to expand...


Depending on the LCD display technology used a powerful laser can do irrepairable damage. Most LCD screens now use an active matrix that depends on millions of transistors to 'turn on' or 'turn off' the liquid crystal sub-pixels. The heat from a high powered laser could easily burn up those transistors. Not to mention that the liquid crystals themselves are extremely sensitive to heat. This can be easily observed in mood rings and those 'stress test' cards that people hand out as these also use liquid crystals to change colors.
 
randomlugia

randomlugia

0
Joined
Sep 4, 2008
Messages
1,807
Points
0
I have noticed that the higher the wavelength of the laser, the more damage it does to electronics. Those "lightscribe" CDs can be written on with lasers. BR lasers don't do anything, but reds burn through the data layer. A high powered red laser would instantly do massive damage to an LCD screen.
 
Hemlock_Mike

Hemlock_Mike

0
Joined
Jan 7, 2007
Messages
6,309
Points
83
An O'scope tube has longer persistance than a TV tube.
As said, do this ONLY on an old school phosphor type tube -- has an electron gun and a HV supply.

Mike
 
S

steve001

0
Joined
Jun 3, 2007
Messages
2,560
Points
113
sportcoupe said:
Don't be so quick. I didn't know this nor did the OP. I am sure there are many more members that don't either.
Click to expand...

It's likely age related. If you been alive long enough you learn a few things. Blacklight does the same
 
.3lite

.3lite

0
Joined
May 4, 2009
Messages
287
Points
18
Yes nothing new, but I was always thinking if TV could get damaged (screen)? As I remember someone told me that, idk if its true lol ;o
 
You must log in or register to reply here.




Top