Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Another 6x dies...

Joined
Oct 10, 2008
Messages
314
Points
18
Well my trusty AW210 6x died today... it became an LED. I was hoping a fresh battery would fix her right but no luck. I figure it must have died from me 'pulsing' the laser on and off by holding the tail switch partially in. Oh well, the Dorcy will play host to an 8x next once I get the money for the drive. Since I have a driver sitting around doing nothing I guess I'll use it in my PHR penlight build.
 





Joined
May 4, 2009
Messages
5,443
Points
113
Yes how many Ma was it running at, and by pulsing you may have caused some kind of inductance but I doubt it, it was prob just it's time.
 
Joined
Oct 10, 2008
Messages
314
Points
18
I was running it at 230ma... probably a little too high for any kind of longetivity for that diode. I got a month and half out of it with run times running from a few seconds on and off to around two minutes on and five minutes off when doing burn tests. But the majority of the time it was on for no longer than 15 - 20 seconds. I was using an older version 2 flexdrive since my version 4 lavadrive died an untimely death by accidental short circuit to the host.
 
Joined
Apr 29, 2008
Messages
1,562
Points
48
Hmm. It seems that the SF-AW210 diode has shown very inconsistent results.. I just hope mine survives at 160mA:undecided:
 
Joined
Oct 10, 2008
Messages
314
Points
18
Yep, but money's real tight now so the 8x will have to wait. Fortunately I have a PHR that I can play around with for the time being.
 
Joined
Feb 22, 2008
Messages
3,181
Points
48
Well my trusty AW210 6x died today... it became an LED. I was hoping a fresh battery would fix her right but no luck. I figure it must have died from me 'pulsing' the laser on and off by holding the tail switch partially in. Oh well, the Dorcy will play host to an 8x next once I get the money for the drive. Since I have a driver sitting around doing nothing I guess I'll use it in my PHR penlight build.

you know i have five or six phr builds i use daily me and my kids
they are at 150 ma and put out about 135-140 mw i also have a 6x that puts out 180 mw at 200 ma the phr is the best bang for your buck diode out there
 
Joined
Oct 10, 2008
Messages
314
Points
18
You know what else sucks, the version 2 lavadriver is too big for my pen host!!! So I have put the PHR back into the Dorcy host for now until I receive the new version 4 lavadriver that will fit. Strange how that PHR diode keeps making its way back to the Dorcy flashlight host. It must be a cursed diode LOL.
 




Top