405nm drivers that fits Aixiz module good for PEN build - Laser Pointer Forums

matrixcs · 09-30-2009, 01:50 AM

Hi guys here is my size comparison based on what drivers i have..

1 rckstr fixed current
1 o-like 405nm driver
1 flxdrive v4.

all fits aixiz module casing.. Good for PEN build.

PROS: these drivers performed well. both the flex drive and o-like driver uses 2 AAA batteries and they serve well.

the Rckstr driver also works well too using 2 10440 batteries...

FITS the back casing of the Aixiz module if you are going to build a PEN type BR.

CONS: just dont let these drivers touch the inside case.. you will probably short the whole circuit and damage the driver..

-- o-like driver is super sensitive and unstable when it comes to current spike.. if you are to use this on a PHR diode.. just set it to 100mA it will be safe of your diode..

OTHER THOUGHTS: hehehe im going to order the variable rckstr driver and the v5 flexdrive..

here is the picture..

daguin · 09-30-2009, 01:57 AM

Nice idea

+1

Peace,
dave

rangedunits · 09-30-2009, 02:04 AM

Thanks for this great thread!

matrixcs · 09-30-2009, 07:19 AM

thanks guys.. i will be also posting some charts soon... i will be experimenting on their current settings and also their performance....

LarryDFW · 09-30-2009, 11:55 PM

matrixcs;

I've used the Rayfoss BR step-up driver @ 180 & 200 ma settings in this build.

It was small enough to fit in the Axiz 12mm module.

New 6X Continuous-Duty BR Build

LarryDFW

matrixcs · 10-01-2009, 01:24 AM

i see larry i will be ordering the rayfoss one too.. so i can complete my review and comparison of these drivers..

is this the driver you used?

rayfoss 405nm driver

LarryDFW · 10-01-2009, 03:30 AM

Yes; that is the driver I used.

In a pen, it is negative to the spring.

In my host, I just wired it with the positive toward the LD.

LarryDFW

o0ICE0o · 10-12-2009, 03:41 AM

Thank you for the link to the o-like driver!
I did not know that they made them... I need to try one now.

matrixcs · 10-12-2009, 06:18 PM

no problem!! update.. rayfoss 405nm driver is 100% similar to o-like..

zavlian · 08-07-2010, 05:38 AM

Thanks alot but im a noob and i know im probley going to get a lot of $ h i t for saying that. well i have built a driver before and all it did was burn out my 16X DVD laser in only 5 min so yea i have been rely in to the blue and purple lasers because they burn hard and look amazing.

09-30-2009, 01:50 AM	#1
matrixcs Class 2M Laser Join Date: May 2009 Location: Philippines Posts: 653 Rep Power: 16	405nm drivers that fits Aixiz module good for PEN build Hi guys here is my size comparison based on what drivers i have.. 1 rckstr fixed current 1 o-like 405nm driver 1 flxdrive v4. all fits aixiz module casing.. Good for PEN build. PROS: these drivers performed well. both the flex drive and o-like driver uses 2 AAA batteries and they serve well. the Rckstr driver also works well too using 2 10440 batteries... FITS the back casing of the Aixiz module if you are going to build a PEN type BR. CONS: just dont let these drivers touch the inside case.. you will probably short the whole circuit and damage the driver.. -- o-like driver is super sensitive and unstable when it comes to current spike.. if you are to use this on a PHR diode.. just set it to 100mA it will be safe of your diode.. OTHER THOUGHTS: hehehe im going to order the variable rckstr driver and the v5 flexdrive.. here is the picture.. __________________ never stop learning.... 405nm Drivers that Fits Aixiz Modules/ Great for PEn Build Daguin's Custom Modules grab yours now! Jayrob's Kits and Stuffs (the ultimate choice!) grab one now! Jayrob's Tutorials and Projects here! JayRob's Yellow Laser Tutorial LPF Laser PRO Shop! Check here

09-30-2009, 01:57 AM	#2
daguin Moderator Join Date: Mar 2008 Location: Sunny Southern California Posts: 11,874 Rep Power: 369	Re: 405nm drivers that fits Aixiz module good for PEN build Nice idea +1 Peace, dave __________________ I have 445nm diodes IN STOCK for immediate shipping (click me) Niko only WISHES he could SPAM like me Did you get some benefit from reading this forum? If so, CLICK HERE to donate $2 to keep it going

09-30-2009, 02:04 AM	#3
rangedunits Class 3B Laser Join Date: Jan 2008 Location: Quebec, Canada Posts: 3,022 Rep Power: 37	Re: 405nm drivers that fits Aixiz module good for PEN build Thanks for this great thread! __________________ My lasers listed by their Peak Measured with a LB-II. 966mW Aurora cree c6 w/ Ez Focus &405-G-1. 143mW Evo Pro (Wickedlasers 130mW review unit) 200mW Dilda (Dealextreme First model). 79mW X-75 (Novalasers X-75) 5x 50mW green (they from laserpointerpen) I am never serious. -Greg

09-30-2009, 07:19 AM	#4
matrixcs Class 2M Laser Join Date: May 2009 Location: Philippines Posts: 653 Rep Power: 16	Re: 405nm drivers that fits Aixiz module good for PEN build thanks guys.. i will be also posting some charts soon... i will be experimenting on their current settings and also their performance.... __________________ never stop learning.... 405nm Drivers that Fits Aixiz Modules/ Great for PEn Build Daguin's Custom Modules grab yours now! Jayrob's Kits and Stuffs (the ultimate choice!) grab one now! Jayrob's Tutorials and Projects here! JayRob's Yellow Laser Tutorial LPF Laser PRO Shop! Check here

09-30-2009, 11:55 PM	#5
LarryDFW Class 2M Laser Join Date: Dec 2008 Location: Dallas, TX Posts: 852 Rep Power: 18	Re: 405nm drivers that fits Aixiz module good for PEN build matrixcs; I've used the Rayfoss BR step-up driver @ 180 & 200 ma settings in this build. It was small enough to fit in the Axiz 12mm module. New 6X Continuous-Duty BR Build LarryDFW __________________ . Link- New Hi-Power LD Lenses w/ Stainless Steel Aperture Assemblies For Sale Link- F.S.- New LG/Sanyo #18650 Li-Ion Batteries - 2600 mah UL Listed- $9.95 prepaid (Dual Charger -$8.95) 445's,Blu-Rays, Red OC's, Green Focusables in Hard Anodized Hosts Link- Safe Operating Blu-Ray Laser Current Chart Last edited by LarryDFW; 10-13-2009 at 03:01 AM.

10-01-2009, 01:24 AM	#6
matrixcs Class 2M Laser Join Date: May 2009 Location: Philippines Posts: 653 Rep Power: 16	Re: 405nm drivers that fits Aixiz module good for PEN build i see larry i will be ordering the rayfoss one too.. so i can complete my review and comparison of these drivers.. is this the driver you used? rayfoss 405nm driver __________________ never stop learning.... 405nm Drivers that Fits Aixiz Modules/ Great for PEn Build Daguin's Custom Modules grab yours now! Jayrob's Kits and Stuffs (the ultimate choice!) grab one now! Jayrob's Tutorials and Projects here! JayRob's Yellow Laser Tutorial LPF Laser PRO Shop! Check here Last edited by matrixcs; 10-01-2009 at 01:27 AM.

10-01-2009, 03:30 AM	#7
LarryDFW Class 2M Laser Join Date: Dec 2008 Location: Dallas, TX Posts: 852 Rep Power: 18	Re: 405nm drivers that fits Aixiz module good for PEN build Yes; that is the driver I used. In a pen, it is negative to the spring. In my host, I just wired it with the positive toward the LD. LarryDFW __________________ . Link- New Hi-Power LD Lenses w/ Stainless Steel Aperture Assemblies For Sale Link- F.S.- New LG/Sanyo #18650 Li-Ion Batteries - 2600 mah UL Listed- $9.95 prepaid (Dual Charger -$8.95) 445's,Blu-Rays, Red OC's, Green Focusables in Hard Anodized Hosts Link- Safe Operating Blu-Ray Laser Current Chart

10-12-2009, 03:41 AM	#8
o0ICE0o Class 2 Laser Join Date: Jul 2009 Posts: 366 Rep Power: 4	Re: 405nm drivers that fits Aixiz module good for PEN build Thank you for the link to the o-like driver! I did not know that they made them... I need to try one now. __________________ FireMyLaser says: "Niko likes cereal."

10-12-2009, 06:18 PM	#9
matrixcs Class 2M Laser Join Date: May 2009 Location: Philippines Posts: 653 Rep Power: 16	Re: 405nm drivers that fits Aixiz module good for PEN build no problem!! update.. rayfoss 405nm driver is 100% similar to o-like.. __________________ never stop learning.... 405nm Drivers that Fits Aixiz Modules/ Great for PEn Build Daguin's Custom Modules grab yours now! Jayrob's Kits and Stuffs (the ultimate choice!) grab one now! Jayrob's Tutorials and Projects here! JayRob's Yellow Laser Tutorial LPF Laser PRO Shop! Check here

08-07-2010, 05:38 AM	#10
zavlian Junior Member Join Date: Aug 2010 Posts: 8 Rep Power: 0	Re: 405nm drivers that fits Aixiz module good for PEN build Thanks alot but im a noob and i know im probley going to get a lot of $ h i t for saying that. well i have built a driver before and all it did was burn out my 16X DVD laser in only 5 min so yea i have been rely in to the blue and purple lasers because they burn hard and look amazing.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode